Search results for: 'installed'

Pre-installed stainless steel capillary kit for pump module, 0.45 mm ID, black color code (2x of PN G1547B, 1x of G1547A)

Back-pressure regulator assembly, including holder, replaceable cartridge, fittings and ferrules. Installed after the detector to prevent bubble formation in the flow cell.

This regulator assembly is used to set the low pressure for systems with the HT-12 or HT-24 options installed.

Removable spill tank used to capture and contain reaction components and vial fragments should a reaction vial fail in the cavity of the system. These trays fit into the spill channel of the system and are installed with a thumbscrew.

In-line filter cartridge installed in pump purge valve inlet fitting. Filters eluents between the pump heads and the purge valve (before the mixer). Stainless steel frit, 2 µm pore size, 20 µL volume. Replacement interval is every 5,000 working hours.

80 mL locking cover seal plug replacement o-ring.

80 mL locking cover seal plug replacement o-ring.

1.78" plug for the 80 mL locking cover

80 mL locking cover seal plug replacement o-ring, pack of 6.

The Reaction Vessel Attenuator Assembly consists of the Liberty Blue attenuator assembly, tubing, and 30 mL reaction vessel.

Pressure sensor option for CEM Plus series vessels.

The Discover Spill Tray for Liberty Blue HT12/HT24 is designed to prevent any reagent spills or drips that occur when loading reagents on the system from damaging the Discover microwave reactor.

Add-on option for the MARS 6

The Reaction Vessel Attenuator Assembly with Resin Loader for HT12/HT24 consists of the Liberty Blue attenuator with a resin tube, communications/power cable for the resin tube motor, tubing, and 30 mL reaction vessel.