Search results for: 'q cups 1'

Q-Cups are coated aluminum sample holders for the EDGE Extraction System. Q-Cups consist of a cylinder piece which holds the sample, and a threaded bottom piece which holds the Q-Disc filter. This kit includes 12 Q-Cups, which is the maximum number of samples that can be extracted in a run. For efficiency, it's recommended to have two sets (24 Q-Cups) and two Glass Vial Racks. This would allow one set to be ran in an EDGE, while another set is being prepared.

Includes

• 12 Q-Cup Cylinders
• 12 Q-Cup Threaded Bottoms

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The S1 discs are a stack of C9 + G1 + C9 Q-Disc recommended for all applications.

Includes

• 125 S1 Q-Discs

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C1 discs are thin 2.5 µm cellulose filters recommended for extraction applications of dry samples. These discs are suitable for GC or Gravimetric analysis.

Includes 500 C1 Q-Discs.

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The M1 discs are thin 0.25 µm membrane filters recommended for extraction applications of dry samples. These discs are suitable for LC, GC or Gravimetric analysis.

Includes 250 M1 Q-Discs

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The D2 discs are 1 µm polypropylene depth filters that can be used for PFAS extraction.

Includes

• 125 D2 Q-Discs

PFAS Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE PFAS Extraction System. These discs are tested to not contain PFAS and recommended for all sample types.

Includes 125 PFAs Q-Discs.

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C4 discs are thin 11 µm cellulose filters recommended for extraction applications of dry or wet samples. These discs are suitable for GC or Gravimetric analysis.

Includes 500 C4 Q-Discs.

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C3 discs are thin 7 µm cellulose filters recommended for extraction applications of dry samples. These discs are suitable for GC or Gravimetric analysis.

Includes 250 C3 Q-Discs.

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C7 discs are thin 20 µm cellulose filters recommended for extraction applications of dry or wet samples. These discs are suitable for GC or Gravimetric analysis.

Includes 250 C7 Q-Discs.

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C2 discs are thin 5 µm cellulose filters recommended for extraction applications of dry or wet samples. These discs are suitable for LC, GC or Gravimetric analysis.

Includes

• 250 C2 Q-Discs

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The G0 discs are thin 0.3 µm glass fiber filters recommended for extraction applications of dry or wet samples. These discs are suitable for LC, GC or Gravimetric analysis. When using G0 a Q-Support must also be used.

Includes 250 G0 Q-Discs.

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The M2 discs are thin 0.25 µm membrane filters recommended for extraction applications of wet or dry samples. These discs are suitable for LC, GC or Gravimetric analysis. The C9 discs must be used underneath the M2 discs to provide structural support during extraction.

Includes

• 500 M2 Q-Discs
• 500 C9 Q-Discs

Q-Screens are inserted on top of the sample within the Q-Cup Sample Holder for the EDGE Extraction System. A tool is used to insert the reusable stainless steel screens to keep the sample firmly packed within the Q-Cup Sample Holder.

Includes

• 1 Q-Screen

Q-Screens are inserted on top of the sample within the Q-Cup Sample Holder for the EDGE Extraction System. A tool is used to insert the reusable stainless steel screens to keep the sample firmly packed within the Q-Cup Sample Holder.

Includes

• 12 Q-Screens
• Q-Screen Tool

High temperature Discover cavity spill cup for camera option.

Discover high temperature spill cup

Removable rack for the 40 mL EDGE Extraction system that holds twelve Q-Cup Sample Holders and twelve 50 mL centrifuge tubes.

Removable rack for the 40 mL EDGE Extraction system that holds eight Q-Cup Sample Holders and eight 60 mL glass collection vials.