Search results for: 'liberty blue op'

Larger reservoirs for all reagents used in peptide synthesis

The Reaction Vessel Attenuator Assembly consists of the Liberty Blue attenuator assembly, tubing, and 30 mL reaction vessel.

The Discover Spill Tray for Liberty Blue HT12/HT24 is designed to prevent any reagent spills or drips that occur when loading reagents on the system from damaging the Discover microwave reactor.

The 6 L Waste Option for Liberty Blue allows for the use of a larger waste container, increasing the scale and number of peptides that can be run before the waste container needs to be emptied.

The Fiber Optic Temperature Probe is 3 ft (91 cm) fiber optic temperature probe with connector for fiber optic temperature measurement and control option.

The fiber-optic probe clip slides over the fiber-optic probe and the thermowell of the reaction vessel attenuator assembly to secure the probe.

These bottles are a larger reservoirs option for amino acid positions of the Liberty Lite (2.0), Liberty Blue (2.0), and Liberty Prime (2.0), and for HT resin positions.

The HT12 option for the Liberty Blue and Liberty Prime provides automation for up to 12 peptide reactions. New reactions can be added and programmed at any time, even while another sample is running.

The Standard Level Sensor Cap Assembly is the insert with five ports used to connect the Waste Bottle to the Liberty Blue.

The Reaction Vessel Attenuator Assembly with Resin Loader for HT12/HT24 consists of the Liberty Blue attenuator with a resin tube, communications/power cable for the resin tube motor, tubing, and 30 mL reaction vessel.

Pressure rated bottle typically used for Deprotection

Pressure rated bottle typically used for Main Wash

Pressure rated bottle typicaly used for Activator and Activator Base

The Thermowell with Resin Disruptor is a sapphire sheath used to protect the fiber-optic temperature probe.