Set Descending Direction

19 Item(s)

  1. The replacement drain line includes a quick disconnect fitting to allow for easy removal of the reaction vessel. Learn More
  2. Pack of 5 disposable frits for the Liberty Blue 2-piece reaction vessel. These frits should be replaced after about 1000 couplings. Learn More
  3. The Fiber Optic Temperature Probe is 3 ft (91 cm) fiber optic temperature probe with connector for fiber optic temperature measurement and control option. Learn More
  4. Discover cavity spill cup for camera option. Learn More
  5. The Reaction Vessel Overflow Filter is located inside the Liberty Blue and is intended to prevent resin from backing up into the fluidics system in the event of a reaction vessel overflow event. Learn More
  6. Reaction Vessel O-ring Learn More
  7. The fiber-optic probe clip slides over the fiber-optic probe and the thermowell of the reaction vessel attenuator assembly to secure the probe. Learn More
  8. The Thermowell with Resin Disruptor is a sapphire sheath used to protect the fiber-optic temperature probe. Learn More
  9. The Wash Solvent Spray head is an 0.75" fitting designed to direct wash solvent to the sides of the vessel. Learn More
  10. Replacement reaction vessel body. Learn More
  11. This assembly includes the reaction vessel base, o-ring, and drain line with union. Replacement is required should the o-ring become worn or damaged because the o-ring is not serviceable. Learn More
  12. This kit provides all parts required to upgrade a system using the 1-piece reaction vessel to a 2-piece reaction vessel. Includes a calibration stand (P/N 551625), 125-mL 2-piece reaction vessel assembly (P/N 551535), and 20 pack of frits (P/N 551770). Learn More
  13. A 5 pack of replacement frits for the 125 mL 2-piece reaction vessel.. Learn More
  14. A 20 pack of replacement frits for the 125 mL 2-piece reaction vessel. Learn More
  15. This suppressor attaches to the reagent line of the attenuator assembly to reduce liquid spray on the walls of the reaction vessel. Learn More
  16. The 30 mL reaction vessel assembly includes the reaction vessel, union, and associated fittings and ferrules. It should be used for synthetic scales less than 0.5 mmol. Learn More
  17. The 125 mL reaction vessel can be used for syntheses at 0.5 mmol and greater or for syntheses using more then 1 g resin. Learn More
  18. Pack of 20 disposable frits for the Liberty Blue 2-piece reaction vessel. These frits should be replaced after about 1000 couplings. Learn More
  19. This full vessel assembly includes a vessel body (P/N 551790) and base assembly (P/N 551780). For use with an existing calibration stand. Learn More

Set Descending Direction

19 Item(s)