Liberty PRIME 2.0

A 5 pack of replacement frits for the 125 mL 2-piece reaction vessel..
Saber más

This assembly includes the reaction vessel base, o-ring, and drain line with union. Replacement is required should the o-ring become worn or damaged because the o-ring is not serviceable.
Saber más

Replacement reaction vessel body.
Saber más

This full vessel assembly includes a vessel body (P/N 551790) and base assembly (P/N 551780). For use with an existing calibration stand.
Saber más

Reaction vent filter for use with externally mounted housings.
Saber más

Reaction vent filter for use with externally mounted housings.
Saber más

Reaction vent filter for use with externally mounted housings.
Saber más

Standard reaction vessel. Teflon body with a tapered bottom and a 35 micron porous glass frit pressed into its bottom,
Saber más

These frits are compatible with the Liberty (2.0) Line’s 2-piece reaction vessel and should be replaced after about 1,000 couplings.
Saber más

The 1/8" to 3/16" PEEK Union allows the connection of a piece of 1/8" OD tubing to a piece of 3/16" OD tubing.
Saber más