Glass vials to collect the extract placed in the rack for the EDGE Extraction system. These glass collection vials are clear, 40 mL, pre-sterilized and capped.
Glass vials to collect the extract placed in the rack for the EDGE Extraction system. These glass collection vials are graduated, 40 mL, pre-sterilized and capped.
Glass vials to collect the extract placed in the rack for the EDGE Extraction system. These glass collection vials are amber, 40 mL, pre-sterilized and capped.
The Waste Bottle Assembly collects the waste for the 40 mL EDGE Extraction system. The 2 L bottle and cap equipped with a level sensor is connected to EDGE Extraction system by vent line tubing, drain line tubing and level sensor connector.
Replacement Cartridge (40 psi) for back-pressure regulator holder/assembly. Constructed with PEEK, Tefzel (EFTE), PCTFE, and gold plated stainless steel spring. En savoir plus
Back-pressure regulator assembly, including holder, replaceable cartridge, fittings and ferrules. Installed after the detector to prevent bubble formation in the flow cell. En savoir plus
The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples with 50 mL measurement line for easy dilutions. En savoir plus
Q-Shields are applied to the top of the glass collection vials for the EDGE Extraction System. The disposable aluminum shields help to eliminate splashing and minimize evaporation of the extract. The collection vial cap can be used as a tool to firmly apply shields.
Transform your Phoenix BLACK into a workstation for automatic calculation, storage and transfer of results. This will assist you in complying with CFR 11 Part 21, ISO and other QC requirements.
For use in countries with 208-240V and 50/60HZ power supply. En savoir plus
This vapor scrubbing system can safely remove harmful fumes from the furnace cavity and neutralize any residual acid exhausted (sulfur dioxide and nitric acid). The configuration meets ISO 14000 regulations and all requirements for USP 281 (ROI) & USP 733 (LOI). The sulfated ash system can be disconnected in less than five minutes without the use of tools. The quartz furnace ceiling assures sample purity. USB data output provides CFR 21 part 11 compliance for output of data, method details and date of completion. En savoir plus
The Q-Support is a reusable stainless steel mesh disc that is inserted on top of a Q-Disc to provide extra support. When using Q-Support a G0 Q-Disc should be used.
En savoir plus
Large sample loop ideal for high volume (10-20 mL) injections. Provides maximum loading of 30 mm columns in ambient temperature conditions. En savoir plus
Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.
iWave temperature control and standard Teflon coated ring.
En savoir plus
Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.
Fiber optic temperature control with saphire thermowell, EPS pressure, and premium ring.
En savoir plus
Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.
Fiber optic temperature control with saphire thermowell, EPS pressure, and premium ring.
En savoir plus
Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.
Fiber optic temperature only control with saphire thermowell and Premium ring.
En savoir plus
Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.
Fiber optic temperature only control with saphire thermowell and Premium ring.
En savoir plus
Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.
iWave temperature control and premium ring.
En savoir plus
This vapor scrubbing system can safely remove harmful fumes from the furnace cavity and neutralize any residual acid exhausted (sulfur dioxide and nitric acid). The configuration meets ISO 14000 regulations and all requirements for USP 281 (ROI) & USP 733 (LOI). The sulfated ash system can be disconnected in less than five minutes without the use of tools. The quartz furnace ceiling assures sample purity. USB data output provides CFR 21 part 11 compliance for output of data, method details and date of completion. En savoir plus
Turntable designed to hold 40 standard 50 mL centrifuge tubes with cap. The HT-50 is designed for the extraction of PFAS from solid samples using IR temperature control. En savoir plus
Our best-selling crucible. Holds up to 5g of sample. When used in the Phoenix BLACK microwave muffle furnace, up to 24 samples can be ashed at the same time. Quantity: 100 En savoir plus
The iPrep vessel is a high pressure, high sample weight, contactless monitored, high temperature vessel for use with MARS 6 with iWave. This vessel is well suited for digestion of difficult matrices such as waste oils, APIs with multiple aromatic rings, and geological samples. This vessel is also a great option when digesting 1 g or larger samples due to ppt detection limit needs.
The iPrep vessel is a high pressure, high sample weight, contactless monitored, high temperature vessel for use with MARS 6 with iWave. This vessel is well suited for digestion of difficult matrices such as waste oils, APIs with multiple aromatic rings, and geological samples. This vessel is also a great option when digesting 1 g or larger samples due to ppt detection limit needs.
The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples with 50 mL measurement line for easy dilutions.
En savoir plus
The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples with 50 mL measurement line for easy dilutions. En savoir plus
The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples with 50 mL measurement line for easy dilutions.
En savoir plus
The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples with 50 mL measurement line for easy dilutions. En savoir plus
Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.
Fiber optic temperature control with saphire thermowell, EPS pressure, and standard Teflon coated ring.
En savoir plus
Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.
Fiber optic temperature control with saphire thermowell, EPS pressure, and standard Teflon coated ring. En savoir plus
Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.
Fiber optic temperature only control with saphire thermowell and standard Teflon coated ring. En savoir plus
Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.
Fiber optic temperature only control with saphire thermowell and standard Teflon coated ring.
En savoir plus
Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.
iWave temperature control and standard Teflon coated ring.
En savoir plus
Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.
iWave temperature control and premium ring.
En savoir plus
The iPrep vessel is a high pressure, high sample weight, contactless monitored, high temperature vessel for use with MARS 6 with iWave. This vessel is well suited for digestion of difficult matrices such as waste oils, APIs with multiple aromatic rings, and geological samples. This vessel is also a great option when digesting 1 g or larger samples due to ppt detection limit needs.
The iPrep vessel is a high pressure, high sample weight, contactless monitored, high temperature vessel for use with MARS 6 with iWave. This vessel is well suited for digestion of difficult matrices such as waste oils, APIs with multiple aromatic rings, and geological samples. This vessel is also a great option when digesting 1 g or larger samples due to ppt detection limit needs.
