Résultats de recherche pour : '- to b'

Adapter Ball Connector (connects Discover SP-D 80 to Explorer automation module)
En savoir plus

Torque Wrench (calibrated to 5 ft-lbs)
En savoir plus

For use with all EasyPrep Vessels.
En savoir plus

The ACT/ACT-B dip tube allows the system to draw up liquid from the ACT or ACT-B bottles.
En savoir plus

Fmoc-Lys(palmitoyl-Glu-OtBu)-OH
En savoir plus

Fmoc-Lys(palmitoyl-Glu-OtBu)-OH
En savoir plus

The Syringe to 1/8" Fitting Adapter is used to connect a luer-tip syringe to the standard 1/8" OD tubing.
En savoir plus

The Bottle Tubing Bundle for Pass-Through Bottle Caps consists of two tubes use to connect pressure rated bottles to Deprotection and Main Wash positions
En savoir plus

Fmoc-Trp(Boc)-OH
En savoir plus

Fmoc-Trp(Boc)-OH
En savoir plus

Fmoc-Trp(Boc)-OH
En savoir plus

Turntable designed to hold 40 standard 50 mL centrifuge tubes with cap. The HT-50 is designed for the extraction of PFAS from solid samples using IR temperature control.
En savoir plus

50-place, 120V heater block used to optimize sample temperature prior to total fat analysis when utilizing the robotic option.
En savoir plus

50-place, 240V heater block used to optimize sample temperature prior to total fat analysis when utilizing the robotic option.
En savoir plus

The Resin Distributor kit includes an adaptor block that holds the 96-well synthesis plate, three loading plate options, and a transfer plate that houses the loading plate.
En savoir plus

The Activator/Activator Base Bottle O-ring is an EPDM o-ring used to seal the activator and activator base bottles to the reagent manifold.
En savoir plus

30 filters for amino acid, activator and activator base dip tubes.
En savoir plus

300 filters for amino acid, activator and activator base dip tubes.
En savoir plus

Pressure regulator kit for Discover instruments
En savoir plus

The 4 mL Disposable Reaction Vessel is used to perform microcleavages.
En savoir plus

The Luer Plug is used to cap the reaction vessels during cleavage.
En savoir plus

155 mm glass connector adapter with 24/40 joint
En savoir plus

Undergraduate lab manual for teaching microwave assisted organic synthesis.
En savoir plus

The Bottle Dip Tube Filter is used in the main solvent and deprotection bottles of the Discover Bio wash station.
En savoir plus

Exhaust Blower for Discover SP-D without automation only
En savoir plus

Discover SP-D Fume Cabinet for 24/48 place autosampler. Fume Cabinet designed to be used with the Discover SP-D with Explorer 24/48. Includes retrofit kit PN 730099.
En savoir plus

Discover SP-D Fume Cabinet for 36/72 place autosampler. Fume Cabinet designed to be used with the Discover SP-D with Explorer 36/72. Includes retrofit kit PN 730099.
En savoir plus

Discover SP-D Fume Cabinet for 48/96 place autosampler. Fume Cabinet designed to be used with the Discover SP-D with Explorer 48/96. Includes retrofit kit PN 730099.
En savoir plus

10 mL fiber optic attenuator for the Discover S-Class system.
En savoir plus

Replacement level indicator to be used with the 2-piece reaction vessel calibration stand.
En savoir plus

The Benchtop Air Ionizer helps removes static to aid in speed and accuracy when working with powdered samples or in low humidity environments.
En savoir plus

Fmoc AA Kit (20 bottle kit)
En savoir plus

Low Inventory
Rink Amide ProTide Resin
En savoir plus

Low Inventory
Rink Amide ProTide Resin
En savoir plus

Low Inventory
Rink Amide ProTide Resin
En savoir plus

Low Inventory
Rink Amide ProTide Resin
En savoir plus

Replacement label for MARSXpress turntables top label.
En savoir plus

Q-Matrix Hydra, a polymer super absorbent, is used within the Q-Cup Sample Holder to aid in the removal of water from the sample for the EDGE Extraction System.

Includes 500 g of Q-Matrix Hydra.


En savoir plus

The Q-Support is a reusable stainless steel mesh disc that is inserted on top of a Q-Disc to provide extra support. When using Q-Support a G0 Q-Disc should be used.
En savoir plus

Autosampler for sequential chemical synthesis, requires Discover 2.0 microwave reactor (sold separately). Run up to 12 reactions per queue, a mixture of 10-mL and 35-mL vessels.
En savoir plus

Autosampler for sequential chemical synthesis, requires Discover 2.0 microwave reactor (sold separately). Run up to 48 reactions per queue, a mixture of 10-mL and 35-mL vessels.
En savoir plus

Calibrate and verify the accuracy of your digestion temperature with a compact, simple to use NIST traceable calibration device.
En savoir plus

PFAS Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE PFAS Extraction System. These discs are tested to not contain PFAS and recommended for all sample types.

Includes 125 PFAs Q-Discs.
En savoir plus

Calibrate and verify the accuracy of your MARS temperature with a compact, simple to use NIST traceable calibration device.
En savoir plus

Analyze large batches unattended on the ORACLE.
En savoir plus

For ease in capping and uncapping MARSXpress Vessels.
En savoir plus

The Thermowell with Resin Disruptor is a sapphire sheath used to protect the fiber-optic temperature probe.
En savoir plus

The fiber-optic probe clip slides over the fiber-optic probe and the thermowell of the reaction vessel attenuator assembly to secure the probe.
En savoir plus

The GL45 3-Way Pass-through Bottle Cap is used to connect the HT-12 transfer solvent bottle to the HT-12 module.
En savoir plus

80 mL pressure attenuator compatible with Discover SP and Discover S-Class
En savoir plus

This regulator assembly is used to set the low pressure for systems with the HT-12 or HT-24 options installed.
En savoir plus

Add-on option for the 80 mL Gas Addition Kit.
En savoir plus

10 mL fiber optic option for sealed vessels, Discover SP and Discover S-Class systems only.
En savoir plus

Pressure sensor option for CEM Plus series vessels.
En savoir plus

1/4" ID inlet/outlet port for open vessel scale up
En savoir plus

Consists of 1x 35 mL attenuator with hole for probe, 1x 10 mL attenuator with hole for probe, 1 open vessel attenuator, 1x 35 mL vessel with integrated thermowell , 1x 10 mL vessel with integrated thermowell, fiber optic option.
En savoir plus

For use with Discover Legacy systems.
En savoir plus

TFM liner to be used in SPD-80 Quartz vessels. 6 Pack
En savoir plus

TFM liner to be used in SPD-80 Quartz vessels. 12 Pack
En savoir plus

Our best-selling crucible. Holds up to 5g of sample. When used in the Phoenix BLACK microwave muffle furnace, up to 24 samples can be ashed at the same time. Quantity: 100
En savoir plus

Crucible caps are ideal for lightweight samples that are prone to blowing out of a crucible during handling. Quantity: 75
En savoir plus

Crucible caps are ideal for lightweight samples that are prone to blowing out of a crucible during handling. Quantity: 48
En savoir plus

Stainless steel rack designed to hold self-sealing crucibles during ash analysis.
En savoir plus

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

Fiber optic temperature control with saphire thermowell, EPS pressure, and standard Teflon coated ring.
En savoir plus

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

Fiber optic temperature control with saphire thermowell, EPS pressure, and standard Teflon coated ring.
En savoir plus

This all-in-one-tool contains an iPrep Torque tool assembly featuring 21 inch lbs. of torque for simple one-click assembly and has an attachable removal tool for ease of use during disassembly.
En savoir plus

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

Fiber optic temperature only control with saphire thermowell and standard Teflon coated ring.
En savoir plus

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

Fiber optic temperature only control with saphire thermowell and standard Teflon coated ring.
En savoir plus

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

Fiber optic temperature control with saphire thermowell, EPS pressure, and premium ring.
En savoir plus

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

Fiber optic temperature control with saphire thermowell, EPS pressure, and premium ring.
En savoir plus

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

Fiber optic temperature only control with saphire thermowell and Premium ring.
En savoir plus

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

Fiber optic temperature only control with saphire thermowell and Premium ring.
En savoir plus

The ashing cover fits into the crucible and reduces the risk of cross contamination or ash loss. Quantity: 200
En savoir plus

The ashing cover fits into the crucible and reduces the risk of cross contamination or ash loss. Quantity: 200
En savoir plus

The ashing cover fits into the crucible and reduces the risk of cross contamination or ash loss. Quantity: 100
En savoir plus

Includes everything needed for MARSXpress Plus Glass Vessel set. For iWave only temperature control.
En savoir plus

Includes everything needed to upgrade a 24-Place MARSXpress Plus, 110 mL, TFM vessel set into a Disposable Glass Vessel set.
En savoir plus

The type K Dual-Element High Temperature Thermocouple contains two thermocouples in one sheath. While one thermocouple controls the operating temperature, the second thermocouple can be connected to a digital thermometer to verify the accuracy of the controlling thermocouple. It is NIST-traceable with a certificate of calibration.
En savoir plus

The type K Dual-Element High Capacity Thermocouple contains two thermocouples in one sheath. While one thermocouple controls the operating temperature, the second thermocouple can be connected to a digital thermometer to verify the accuracy of the controlling thermocouple. It is NIST-traceable with a certificate of calibration.
En savoir plus

Assembly stand for the 100 mL reaction vessel. Includes tool for easy adapter removal
En savoir plus

A polymer super absorbent; tested to not contain PFAS, is used within the sample holder to aid in the dispersive removal of water and impurities during the solvent extraction of PFAS from solid or semi-solid samples.
En savoir plus

12-place, 120V heater block with insulated cover. Used to maintain the appropriate temperature for the normalization kit.
En savoir plus

12-place, 240V heater block with insulated cover. Used to maintain the appropriate temperature for the normalization kit.
En savoir plus

50-place, 120V heater block used to optimize sample temperature prior to total fat analysis.

*Not compatible with the ORACLE + Robot option.
En savoir plus

50-place, 240V heater block used to optimize sample temperature prior to total fat analysis.

*Not compatible with the ORACLE + Robot option.
En savoir plus

The Liberty Blue™ HT12 System Upgrade converts a Discover to an automated microwave peptide synthesizer designed for Fmoc solid phase peptide synthesis.
En savoir plus

The Liberty Blue™ HT24 System Upgrade converts a Discover to an automated microwave peptide synthesizer designed for Fmoc solid phase peptide synthesis.
En savoir plus

RV top oring
En savoir plus

The 120 mL Amino Acid Bottle is a larger reservoir for use on the Amino Acids on the Liberty Blue and Resin positions on the 12 and 24 position High Throughput modules.
En savoir plus

The Amino Acid Manifold O-ring is an EPDM o-ring used to seal the amino acid bottles to the manifold.
En savoir plus

Straight fitting used to connect 1/4" tubing to a cooling gas source.
En savoir plus

80 mL flow cell attenuator and vessel top
En savoir plus

80 mL reaction vessel assembly, does not include a fiber optic thermowell.
En savoir plus

Accessory kit for short style vessels
En savoir plus

The 2-Way Liquid valve is used on the Liberty Blue to control the flow of liquid and gas through the system.
En savoir plus

These screws are used to mount the 2-Way and 3-Way Liquid Valves (PNs 167850 and 167855) to the manifolds. 2.5mm
En savoir plus

These screws are used to mount the 3-Way LiquidX Style valves (PN 167980) to the manifolds.
En savoir plus

The HT Transfer Solvent Bottle Tubing Bundle is used to connect the transfer solvent bottle to the HT-12 module.
En savoir plus

Discover accessory for hydrogenation, carbonylation, or formylation reactions.
En savoir plus

Discover accessory for hydrogenation, carbonylation, or formylation reactions.
En savoir plus

Open vessel attenuator for Discover SP and Discover S-Class system.
En savoir plus

Discover software controller option
En savoir plus

Vessel holder with magnet to hold stir bar when pouring
En savoir plus

Add-on option for the 80 mL Gas Addition Kit for Discover Legacy systems.
En savoir plus

Includes liners, caps, plugs, composite sleeves, turntable, and one vessel rack (not shown). Accepts fiber optic temperature control.
En savoir plus

Includes liners, caps, plugs, composite sleeves, turntable, and one vessel rack (not shown). Accepts fiber optic temperature control.
En savoir plus

TFM spill cup supplied with the Discover SPD 80 reactor. The spill cup inserts directly into cavity to protect the cavity and infrared sensor from damage due to spillage or ruptured reaction vials. Note: Cup Includes side feature for temperature. Compatible with Discover SP-D 80 Plus only
En savoir plus

Removable spill tank used to capture and contain reaction components and vial fragments should a reaction vial fail in the cavity of the system. These trays fit into the spill channel of the system and are installed with a thumbscrew.
En savoir plus

10 mL flow cell attenuator for the Discover S-Class and Discover SP. Not compatible with the Discover Legacy.
En savoir plus

iPrep Torque tool featuring 21 inch lbs. of torque.
En savoir plus

Pronged removal tool for iPrep vessels for ease of use during disassembly.
En savoir plus

Q-Cups are coated aluminum sample holders for the EDGE Extraction System. Q-Cups consist of a cylinder piece which holds the sample, and a threaded bottom piece which holds the Q-Disc filter. This kit includes 12 Q-Cups, which is the maximum number of samples that can be extracted in a run. For efficiency, it's recommended to have two sets (24 Q-Cups) and two Glass Vial Racks. This would allow one set to be ran in an EDGE, while another set is being prepared.

Includes

• 12 Q-Cup Cylinders
• 12 Q-Cup Threaded Bottoms

En savoir plus

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C1 discs are thin 2.5 µm cellulose filters recommended for extraction applications of dry samples. These discs are suitable for GC or Gravimetric analysis.

Includes 500 C1 Q-Discs.


En savoir plus

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C4 discs are thin 11 µm cellulose filters recommended for extraction applications of dry or wet samples. These discs are suitable for GC or Gravimetric analysis.

Includes 500 C4 Q-Discs.


En savoir plus

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The M1 discs are thin 0.25 µm membrane filters recommended for extraction applications of dry samples. These discs are suitable for LC, GC or Gravimetric analysis.

Includes 250 M1 Q-Discs


En savoir plus

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C3 discs are thin 7 µm cellulose filters recommended for extraction applications of dry samples. These discs are suitable for GC or Gravimetric analysis.

Includes 250 C3 Q-Discs.


En savoir plus

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C7 discs are thin 20 µm cellulose filters recommended for extraction applications of dry or wet samples. These discs are suitable for GC or Gravimetric analysis.

Includes 250 C7 Q-Discs.


En savoir plus

Glass vials to collect the extract placed in the rack for the EDGE Extraction system. These glass collection vials are amber, 40 mL, pre-sterilized and capped.

Includes 72 vials.


En savoir plus

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

iWave temperature control and standard Teflon coated ring.
En savoir plus

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

iWave temperature control and standard Teflon coated ring.
En savoir plus

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

iWave temperature control and premium ring.
En savoir plus

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

iWave temperature control and premium ring.
En savoir plus

Glass vials to collect the extract placed in the rack for the EDGE Extraction system. These glass vials collection are amber, 60 mL, pre-sterilized and capped.

Includes 72 vials.


En savoir plus

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The M2 discs are thin 0.25 µm membrane filters recommended for extraction applications of wet or dry samples. These discs are suitable for LC, GC or Gravimetric analysis. The C9 discs must be used underneath the M2 discs to provide structural support during extraction.

Includes

• 500 M2 Q-Discs
• 500 C9 Q-Discs

En savoir plus

Q-Screens are inserted on top of the sample within the Q-Cup Sample Holder for the EDGE Extraction System. A tool is used to insert the reusable stainless steel screens to keep the sample firmly packed within the Q-Cup Sample Holder.

Includes

• 12 Q-Screens
• Q-Screen Tool

En savoir plus

Q-Shields are applied to the top of the glass collection vials for the EDGE Extraction System. The disposable aluminum shields help to eliminate splashing and minimize evaporation of the extract. The collection vial cap can be used as a tool to firmly apply shields.

Includes 250 Q-Shields.


En savoir plus

Pressure rated bottle typically used for Deprotection
En savoir plus

Pressure rated bottle typically used for Main Wash
En savoir plus

Pressure rated bottle typicaly used for Activator and Activator Base
En savoir plus

This wrench is pre-calibrated to provide the proper torque to all 2-way valve adjustments and should always be used when replacing the 2-way valves. The wrench is located inside the back door of the Liberty.
En savoir plus

This kit provides all parts required to upgrade a system using the 1-piece reaction vessel to a 2-piece reaction vessel. Includes a calibration stand (P/N 551625), 30-mL 2-piece reaction vessel assembly (P/N 551605), and 20 pack of frits (P/N 551600).
En savoir plus

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C2 discs are thin 5 µm cellulose filters recommended for extraction applications of dry or wet samples. These discs are suitable for LC, GC or Gravimetric analysis.

Includes

• 250 C2 Q-Discs

En savoir plus

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The G0 discs are thin 0.3 µm glass fiber filters recommended for extraction applications of dry or wet samples. These discs are suitable for LC, GC or Gravimetric analysis. When using G0 a Q-Support must also be used.

Includes 250 G0 Q-Discs.
En savoir plus

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The D2 discs are 1 µm polypropylene depth filters that can be used for PFAS extraction.

Includes

• 125 D2 Q-Discs

En savoir plus

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The S1 discs are a stack of C9 + G1 + C9 Q-Disc recommended for all applications.

Includes

• 125 S1 Q-Discs

En savoir plus

The amino acid dip tube allows the system to draw up amino acid solution.
En savoir plus

This kit provides all parts required to upgrade a system using the 1-piece reaction vessel to a 2-piece reaction vessel. Includes a calibration stand (P/N 551625), 125-mL 2-piece reaction vessel assembly (P/N 551535), and 20 pack of frits (P/N 551770).
En savoir plus

20L Waste Carboy Option
En savoir plus

Replacement Cartridge (40 psi) for back-pressure regulator holder/assembly. Constructed with PEEK, Tefzel (EFTE), PCTFE, and gold plated stainless steel spring.
En savoir plus

PEEK, one-piece hex-head long, 10-32 fittings for connecting the collector manifold tubings to the collector valve
En savoir plus

Back-pressure regulator assembly, including holder, replaceable cartridge, fittings and ferrules. Installed after the detector to prevent bubble formation in the flow cell.
En savoir plus

PTFE Coil to provide a delay time between the detector flow cell and collector valve. Optimized for flow rates of 4-8 mL/min (typical of 10 mm ID columns).
En savoir plus

PTFE Coil to provide a delay time between the detector flow cell and collector valve. Optimized for flow rates of 15-45 mL/min (typical of 20 - 30 mm ID columns).
En savoir plus

Q-Screens are inserted on top of the sample within the Q-Cup Sample Holder for the EDGE Extraction System. A tool is used to insert the reusable stainless steel screens to keep the sample firmly packed within the Q-Cup Sample Holder.

Includes

• 1 Q-Screen

En savoir plus

35 mL pressure rated vessels, pack of 25. The 35 mL pressure vessels have a working volume of 2.0-25.0 mL and are rated up to 300 psi. (Not compatible with Discover Benchmate or Labmate.)
En savoir plus

Removable reaction vessel for sub-ambient temperature reactions.
En savoir plus

The 4 mL Reaction Vessel Holder is used with the disposable 4 mL reaction vessels to perform microcleavages.
En savoir plus

Vessel accessory kit for enzymatic digestion applications.
En savoir plus

Discover software package.
En savoir plus

Add-on option for the MARS 6
En savoir plus

Add-on temperature control option for MARSXpress vessels
En savoir plus

Open vessel support for glassware 250mL-5L.
En savoir plus

Scale-up synthesis and extraction vessel set
En savoir plus

Scale-up synthesis and extraction vessel set
En savoir plus

Adds pressure monitoring to an existing Discover 1 system. 10 mL vessel only.
En savoir plus

Discover accessory for hydrogenation, carbonylation, or formylation reactions.
En savoir plus

Discover accessory for hydrogenation, carbonylation, or formylation reactions.
En savoir plus

80 mL reaction vessel assembly, does not include a fiber optic thermowell.
En savoir plus

Removable reaction vessel for sub-ambient temperature reactions.
En savoir plus

This kit contains a box of (100) 10 mL vessels and a box of (100) PTFE-Silicon septa with snap-top caps.
En savoir plus

This kit contains a box of (100) PTFE-Silicon septa with snap-top caps. (Not compatible with Discover SP or 2.0.)
En savoir plus

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
En savoir plus

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
En savoir plus

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
En savoir plus

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
En savoir plus

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
En savoir plus

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
En savoir plus

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples with 50 mL measurement line for easy dilutions.
En savoir plus

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
En savoir plus

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples with 50 mL measurement line for easy dilutions.
En savoir plus

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
En savoir plus

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples with 50 mL measurement line for easy dilutions.
En savoir plus

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
En savoir plus

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples with 50 mL measurement line for easy dilutions.
En savoir plus

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
En savoir plus

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples with 50 mL measurement line for easy dilutions.
En savoir plus

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
En savoir plus

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
En savoir plus

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
En savoir plus

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
En savoir plus

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
En savoir plus

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
En savoir plus

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
En savoir plus

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
En savoir plus

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
En savoir plus

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
En savoir plus

The Gas Addition spare parts kit includes the following: 

• Pressure line assembly
• 1/8" PFA tubing
• Yellow ferrules
• 1/8" flangeless nut
• Tubing cutter
• Fitting removal tool
• Wrench
• 80 mL cleaning kit
• Fiber optic probe

 

 

 

 

 

En savoir plus

En savoir plus

En savoir plus

Holds up to 4 iPrep vessel assemblies for convenient and safe movement around the lab.
En savoir plus

Integrated Camera Upgrade
En savoir plus

Integrated Camera Upgrade
En savoir plus

En savoir plus

En savoir plus

Glass vials to collect the extract placed in the rack for the EDGE Extraction system. These glass collection vials are clear, 40 mL, pre-sterilized and capped.

Includes 72 vials.


En savoir plus

Includes: 25-4 mL Pyrex Vessels and 100 Caps
En savoir plus

Glass vials to collect the extract placed in the rack for the EDGE Extraction system. These glass collection vials are graduated, 40 mL, pre-sterilized and capped.

Includes 72 vials.


En savoir plus

Glass vials to collect the extract placed in the rack for the EDGE Extraction system. These glass vials collection are clear, 60 mL, pre-sterilized and capped.

Includes 72 vials.


En savoir plus

Single-use, disposable, 20 mL cleavage syringes for use with the Razor Parallel Cleavage System (pack of 60)
En savoir plus

Single-use, disposable, 35 mL cleavage syringes for use with the Razor Parallel Cleavage System (pack of 60).
En savoir plus

Transform your Phoenix BLACK into a workstation for automatic calculation, storage and transfer of results. This will assist you in complying with CFR 11 Part 21, ISO and other QC requirements. For use in countries with 208-240V and 50/60HZ power supply.
En savoir plus

Includes four sealed standards of varying oil content and instructions for setup and use.
En savoir plus

Kit for pump head maintenance: set of gaskets, 2 piston rods, 2 sapphire backing rings, 2 O-rings. Part of annual preventative maintenance.
En savoir plus

Flow cell for semi-prep to prep applications (low to medium sample loading). Stainless steel construction, 2 uL volume, 300 bar pressure limit
En savoir plus

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
En savoir plus

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
En savoir plus

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
En savoir plus