Résultats de recherche pour : 'cem s' Votre recherche ' cem s ' ne correspond à aucun produit. Affichage des résultats en utilisant certains de vos termes de recherche 'cem s '
Part # 512315
Replacement sensors and parts for MARS 6 Universal Pressure Sensor assembly
En savoir plus Part # 215005
The 4 mL Vessel Replacement Frits are disposable frits used with the 4 mL Reaction Vessel Assembly. (Bag of 50)
En savoir plus Part # 516025
The replacement drain line includes a quick disconnect fitting to allow for easy removal of the reaction vessel.
En savoir plus Part # 542462
Replacement pressure module, for use with the top venting 80 mL (P/N: 908925 and 908920).
En savoir plus Part # 544570
Replacement locking cover assembly for the 80 mL reaction accessory.
En savoir plus Part # 544320
Replacement attenuator for short style CoolMate vessel.
En savoir plus Part # 119635
Black Discover CoolMate and Explorer autosampler power cord, 120 V.
En savoir plus Part # 542476
Replacement attenuator for short style CoolMate vessel.
En savoir plus Part # BR119690
Direct replacement for the serial cable used with the Discover Legacy microwave connection to the CoolMate.
En savoir plus Part # 542475
Replacement attenuator for short style CoolMate vessel for serial numbers CF2025 and previous.
En savoir plus Part # 163040
0,00 €
This is a direct replacement for the thermoplastic autosampler racks included with the Explorer 24. This part allows for the insertion of the internal stirring mechanism to effect enhanced stirring with solid supports and highly viscous reaction mixtures.
En savoir plus Part # 541590
This is a direct replacement for the BenchMate (SafeSeal) pressure attenuator.
En savoir plus Part # 911014
Includes liners, caps, plugs, composite sleeves, turntable, and one vessel rack (not shown). Accepts fiber optic temperature control.
En savoir plus Part # 911012
Includes liners, caps, plugs, composite sleeves, turntable, and one vessel rack (not shown). Accepts fiber optic temperature control.
En savoir plus Part # 431740
Used in EasyPrep, EasyPrep Plus, GreenChem, Omni, HP & XP Plus Vessels
En savoir plus Part # 907567
The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
En savoir plus Part # 907569
The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
En savoir plus Part # 164545
Replacement long flangeless nut, 1/4-28 x 1/8" for the 10 mL and 80 mL flow cells.
En savoir plus Part # 510250
The Gas Addition control box is a direct replacement for the control box in the 10 mL and 80 mL Gas Addition Kits.
En savoir plus Part # 404330
iPrep Vessel Holder Holds up to a full set of iPrep vessel liners.
En savoir plus Part # 512411
This all-in-one-tool contains an iPrep Torque tool assembly featuring 21 inch lbs. of torque for simple one-click assembly and has an attachable removal tool for ease of use during disassembly.
En savoir plus Part # 166075
Replacement label for MARSXpress turntables side label.
En savoir plus Part # 404570
Includes everything needed for MARSXpress Plus Glass Vessel set. For iWave only temperature control.
En savoir plus Part # 404575
Includes everything needed to upgrade a 24-Place MARSXpress Plus, 110 mL, TFM vessel set into a Disposable Glass Vessel set.
En savoir plus Part # 404580
50 replacement adapter plugs for MARSXpress Plus Glass Vessels
En savoir plus Part # 404585
50 replacement glass insert plugs for MARSXpress Plus Glass Vessels
En savoir plus Part # 551320
Pressure rated bottle typicaly used for Activator and Activator Base
En savoir plus Part # 170530
Replacement for the Razor Parallel Cleavage System spill tray.
En savoir plus Part # 551770
A 20 pack of replacement frits for the 125 mL 2-piece reaction vessel.
En savoir plus Part # 551775
A 5 pack of replacement frits for the 125 mL 2-piece reaction vessel..
En savoir plus Part # 551780
This assembly includes the reaction vessel base, o-ring, and drain line with union. Replacement is required should the o-ring become worn or damaged because the o-ring is not serviceable.
En savoir plus Part # 229320
0,00 €
Filters waste exhaust gas. Typical replacement interval is every 3 months.
En savoir plus Part # 230760
0,00 €
Replacement rotor seal for collector valve. Replacement interval is every 50,000 switching cycles.
En savoir plus Part # 230765
0,00 €
In-line filter cartridge installed in pump purge valve inlet fitting. Filters eluents between the pump heads and the purge valve (before the mixer). Stainless steel frit, 2 µm pore size, 20 µL volume. Replacement interval is every 5,000 working hours.
En savoir plus Part # 230705
0,00 €
Replacement Cartridge (40 psi) for back-pressure regulator holder/assembly. Constructed with PEEK, Tefzel (EFTE), PCTFE, and gold plated stainless steel spring.
En savoir plus Part # 230720
Replacement Stator (stainless steel) for manual injection valve
En savoir plus Part # NP-1823-A
Set of two replacement racks for BLADE (Left and Right)
En savoir plus Part # 907399
The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
En savoir plus Part # 907389
The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
En savoir plus Part # 907379
The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
En savoir plus Part # 526135
Replacement attenuator for the 35-mL reaction vessel for use in Discover SP.
En savoir plus Part # 192515
Compatible with both plastic (CEM part number 004120) and glass balance pans (CEM part number 004150). For use in all SMART 6, SMART Q and SMART 6 ProFat configurations. Approximately 1.75 in (4.45 cm) in length. For SMART 5 and SMART Turbo balance stems, approximately 2.0 in (5.1 cm) in length, utilize CEM part number 159600.
En savoir plus Part # 50-000067
0,00 €
The Resin Distributor kit includes an adaptor block that holds the 96-well synthesis plate, three loading plate options, and a transfer plate that houses the loading plate.
En savoir plus Part # 430182
Direct replacement of thermowell used for the short style CoolMate vessel
En savoir plus Part # 526011
For use in Discover SP, Discover SP-D Clinical, and Discover SP-D
En savoir plus Part # 164385
0,00 €
80 mL locking cover seal plug replacement o-ring, pack of 6.
En savoir plus Part # 541605
0,00 €
This is a direct replacement for the Explorer pressure attenuator for systems with the IntelliVent pressure option.
En savoir plus Part # 432175
Used in EasyPrep, EasyPrep Plus, Omni, and XP 1500 Plus Vessels
En savoir plus Part # 171825
Explorer replacement rack for 10 mL and 35 mL vessels. Rack can hold (12) 10 mL vessels or (6) 35 mL vessels.
En savoir plus Part # 217420-M
0,00 €
Replacement level indicator to be used with the 2-piece reaction vessel calibration stand.
En savoir plus Part # 404420
Holds up to 4 iPrep vessel assemblies for convenient and safe movement around the lab.
En savoir plus Part # 404415
For use with the iPrep Vessel set for the MARS 6
Includes frame, liner, sleeve, plug, load disc, and screw for iPrep
En savoir plus Part # 181540
Pronged removal tool for iPrep vessels for ease of use during disassembly.
En savoir plus Part # 230755
0,00 €
Light source for Variable Wavelength Detector. Typical replacement interval is every 2,000 working hours
En savoir plus Part # 528315 / 528320
Includes unit upgrade and accessories to provide inert gas flow within the Phoenix BLACK furnace.
En savoir plus Part # NP-1378
50-place, 120V heater block used to optimize sample temperature prior to total fat analysis when utilizing the robotic option.
En savoir plus Part # NP-1379
50-place, 240V heater block used to optimize sample temperature prior to total fat analysis when utilizing the robotic option.
En savoir plus