Process Products

Analytical grade 110 g or 210 g balance with 0.1 mg sensitivity.
En savoir plus

This vapor scrubbing system can safely remove harmful fumes from the furnace cavity and neutralize any residual acid exhausted (sulfur dioxide and nitric acid). The configuration meets ISO 14000 regulations and all requirements for USP 281 (ROI) & USP 733 (LOI). The sulfated ash system can be disconnected in less than five minutes without the use of tools. The quartz furnace ceiling assures sample purity. USB data output provides CFR 21 part 11 compliance for output of data, method details and date of completion.
En savoir plus

This vapor scrubbing system can safely remove harmful fumes from the furnace cavity and neutralize any residual acid exhausted (sulfur dioxide and nitric acid). The configuration meets ISO 14000 regulations and all requirements for USP 281 (ROI) & USP 733 (LOI). The sulfated ash system can be disconnected in less than five minutes without the use of tools. The quartz furnace ceiling assures sample purity. USB data output provides CFR 21 part 11 compliance for output of data, method details and date of completion.
En savoir plus

The AirWave™ option provides increased airflow for high organic sample ashing. This meets the most demanding requirements of large organic samples with ease. Eliminates volume reduction/carbonization on hot plate or Bunsen burners and provide accurate carbon black results in a fraction of the time it takes conventional furnaces. The reproducibility is excellent, making the use of nitrogen atmosphere or quartz tubes unnecessary.
En savoir plus

The type K Dual-Element High Capacity Thermocouple contains two thermocouples in one sheath. While one thermocouple controls the operating temperature, the second thermocouple can be connected to a digital thermometer to verify the accuracy of the controlling thermocouple. It is NIST-traceable with a certificate of calibration.
En savoir plus

Includes four sealed standards of varying oil content and instructions for setup and use.
En savoir plus

50-place, 240V heater block used to optimize sample temperature prior to total fat analysis when utilizing the robotic option.
En savoir plus

50-place, 120V heater block used to optimize sample temperature prior to total fat analysis when utilizing the robotic option.
En savoir plus

-
En savoir plus

50-place, 240V heater block used to optimize sample temperature prior to total fat analysis.

*Not compatible with the ORACLE + Robot option.
En savoir plus