EDGE PFAS

Solvent bottle, glass, GL45 treaded, 1L for the EDGE Extraction System.


Scopri di più

Scopri di più

Calibration tool used to aid in the calibration of the EDGE Extraction Systems autosampler. The the black cap should be inserted into the autosampler fork.


Scopri di più

Calibration tool used to aid in the calibration of the EDGE Extraction Systems autosampler. The the silver post should be loaded into the postion to be calibrated on the EDGE Extraction System.


Scopri di più

Fittings used to connect the vent line tubing and drain line tubing of the Waste Bottle Assembly to the EDGE Extraction System.


Scopri di più

Barcode scanner
Scopri di più

Polypropylene solvent bottle caps for GL45 threaded bottles connected to the EDGE PFAS Extraction System
Scopri di più

A polymer super absorbent; tested to not contain PFAS, is used within the sample holder to aid in the dispersive removal of water and impurities during the solvent extraction of PFAS from solid or semi-solid samples.
Scopri di più

PFAS Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE PFAS Extraction System. These discs are tested to not contain PFAS and recommended for all sample types.

Includes 125 PFAs Q-Discs.
Scopri di più

Q-Cups are coated aluminum sample holders for the EDGE Extraction System. Q-Cups consist of a cylinder piece which holds the sample, and a threaded bottom piece which holds the Q-Disc filter. This kit includes 12 Q-Cups, which is the maximum number of samples that can be extracted in a run. For efficiency, it's recommended to have two sets (24 Q-Cups) and two Glass Vial Racks. This would allow one set to be ran in an EDGE, while another set is being prepared.

Includes

• 12 Q-Cup Cylinders
• 12 Q-Cup Threaded Bottoms

Scopri di più