EDGE Replacement Parts

The Waste Bottle Assembly collects the waste for the 60 mL EDGE Extraction system. The 2 L bottle and cap equipped with a level sensor is connected to EDGE Extraction system by vent line tubing, drain line tubing and level sensor connector. Learn More

Solvent bottle, glass, GL45 treaded, 1L for the EDGE Extraction System.

Learn More

Removable rack for the 60 mL EDGE Extraction system that holds twelve Q-Cup Sample Holders and twelve 50 mL centrifuge tubes.

Learn More

Removable rack for the 60 mL EDGE Extraction System that holds twelve Q-Cup Sample Holders and twelve 40 mL glass collection vials. Learn More

Removable rack for the 60 mL EDGE Extraction system that holds twelve Q-Cup Sample Holders and eight 60 mL glass collection vials. Learn More

The nitrogen option connects nitrogen to the EDGE system and regulates the flow of nitrogen into the system, the nitrogen is used for pressurizing and purging during the extraction process. Learn More

The Q-Support is a reusable stainless steel mesh disc that is inserted on top of a Q-Disc to provide extra support. When using Q-Support a G0 Q-Disc should be used. Learn More

The side enclosure attaches to the open side of the EDGE and can be used to increase the airflow and create a clean environment in the rack area.

Compatible with the 60 mL EDGE system only. Refer to part 525320 for the for the side enlcosure for the 40 mL EDGE system. Learn More

The side enclosure attaches to the open side of the EDGE and can be used to increase the airflow and create a clean environment in the rack area.

Compatible with the 40 mL EDGE system only. Refer to part 525325 for the for the side enlcosure for the 60 mL EDGE system. Learn More

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The S1 discs are a stack of C9 + G1 + C9 Q-Disc recommended for all applications.

Includes

• 125 S1 Q-Discs

Learn More

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The D2 discs are 1 µm polypropylene depth filters that can be used for PFAS extraction.

Includes

• 125 D2 Q-Discs

Learn More

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The G0 discs are thin 0.3 µm glass fiber filters recommended for extraction applications of dry or wet samples. These discs are suitable for LC, GC or Gravimetric analysis. When using G0 a Q-Support must also be used.

Includes 250 G0 Q-Discs. Learn More

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C2 discs are thin 5 µm cellulose filters recommended for extraction applications of dry or wet samples. These discs are suitable for LC, GC or Gravimetric analysis.

Includes

• 250 C2 Q-Discs

Learn More

Solvent bottle caps for GL45 threaded bottles connected to the EDGE Extraction System. Learn More

Glass vials to collect the extract placed in the rack for the EDGE Extraction system. These glass collection vials are amber, 40 mL, pre-sterilized and capped.

Includes 72 vials.

Learn More

Glass vials to collect the extract placed in the rack for the EDGE Extraction system. These glass collection vials are clear, 40 mL, pre-sterilized and capped.

Includes 72 vials.

Learn More

Removable rack for the 40 mL EDGE Extraction System that holds twelve Q-Cup Sample Holders and twelve 40 mL glass collection vials.

Learn More

Glass vials to collect the extract placed in the rack for the EDGE Extraction system. These glass collection vials are graduated, 40 mL, pre-sterilized and capped.

Includes 72 vials.

Learn More

Removable rack for the 40 mL EDGE Extraction system that holds twelve Q-Cup Sample Holders and twelve 50 mL centrifuge tubes.

Learn More

Amino Acid bottles for Liberty Blue and Resin bottles for 12 and 24 position High Throughput modules Learn More

Glass vials to collect the extract placed in the rack for the EDGE Extraction system. These glass vials collection are amber, 60 mL, pre-sterilized and capped.

Includes 72 vials.

Learn More

Glass vials to collect the extract placed in the rack for the EDGE Extraction system. These glass vials collection are clear, 60 mL, pre-sterilized and capped.

Includes 72 vials.

Learn More

Removable rack for the 40 mL EDGE Extraction system that holds eight Q-Cup Sample Holders and eight 60 mL glass collection vials.

Learn More

Calibration tool used to aid in the calibration of the EDGE Extraction Systems autosampler. The the black cap should be inserted into the autosampler fork.

Learn More

Calibration tool used to aid in the calibration of the EDGE Extraction Systems autosampler. The the silver post should be loaded into the postion to be calibrated on the EDGE Extraction System.

Learn More

Alconox’s Luminox detergent for cleaning Q-Cup Sample Holders. The cleaner is suitable for handwashing or for use in a dishwasher.

Learn More

Q-Cups are coated aluminum sample holders for the EDGE Extraction System. Q-Cups consist of a cylinder piece which holds the sample, and a threaded bottom piece which holds the Q-Disc filter. This kit includes 12 Q-Cups, which is the maximum number of samples that can be extracted in a run. For efficiency, it's recommended to have two sets (24 Q-Cups) and two Glass Vial Racks. This would allow one set to be ran in an EDGE, while another set is being prepared.

Includes

• 12 Q-Cup Cylinders
• 12 Q-Cup Threaded Bottoms

Learn More

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C1 discs are thin 2.5 µm cellulose filters recommended for extraction applications of dry samples. These discs are suitable for GC or Gravimetric analysis.

Includes 500 C1 Q-Discs.

Learn More

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C3 discs are thin 7 µm cellulose filters recommended for extraction applications of dry samples. These discs are suitable for GC or Gravimetric analysis.

Includes 250 C3 Q-Discs.

Learn More

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C4 discs are thin 11 µm cellulose filters recommended for extraction applications of dry or wet samples. These discs are suitable for GC or Gravimetric analysis.

Includes 250 C4 Q-Discs.

Learn More

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C7 discs are thin 20 µm cellulose filters recommended for extraction applications of dry or wet samples. These discs are suitable for GC or Gravimetric analysis.

Includes 250 C7 Q-Discs.

Learn More

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C9 discs are thin 40 µm cellulose filters recommended for extraction applications of course samples. These discs are suitable for GC or Gravimetric analysis.

Includes 500 C9 Q-Discs.

Learn More

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The M1 discs are thin 0.25 µm membrane filters recommended for extraction applications of dry samples. These discs are suitable for LC, GC or Gravimetric analysis.

Includes 250 M1 Q-Discs

Learn More

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The G1 discs are thin 0.3 µm glass fiber filters recommended for extraction applications of wet or dry samples. These discs are suitable for LC, GC or Gravimetric analysis. The C9 discs must be used underneath and on top of the G1 discs to provide structural support during extraction.

Includes

• 250 G1 Q-Discs
• 500 C9 Q-Discs

Learn More

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The M2 discs are thin 0.25 µm membrane filters recommended for extraction applications of wet or dry samples. These discs are suitable for LC, GC or Gravimetric analysis. The C9 discs must be used underneath the M2 discs to provide structural support during extraction.

Includes

• 500 M2 Q-Discs
• 500 C9 Q-Discs

Learn More

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. A sampling of different Q-Discs are included in this kit.

Includes

• 20 C1 Q-Discs
• 20 C3 Q-Discs
• 20 C4 Q-Discs
• 20 C7 Q-Discs
• 80 C9 Q-Discs
• 20 M1 Q-Discs
• 20 M2 Q-Discs
• 20 G1 Q-Discs

Learn More

Q-Dry is a solvent evaporator for the EDGE Extraction System using 120 VAC. Q-Dry provides evaporation of 40 mL or 60 mL glass collections vials.
Learn More

Q-Dry is a solvent evaporator for the EDGE Extraction System using 240 VAC. Provides evaporation of 40 mL or 60 mL glass collections vials.
Learn More

Q-Matrix Hydra, a polymer super absorbent, is used within the Q-Cup Sample Holder to aid in the removal of water from the sample for the EDGE Extraction System.

Includes 500 g of Q-Matrix Hydra.

Learn More

Q-Screens are inserted on top of the sample within the Q-Cup Sample Holder for the EDGE Extraction System. A tool is used to insert the reusable stainless steel screens to keep the sample firmly packed within the Q-Cup Sample Holder.

Includes

• 12 Q-Screens
• Q-Screen Tool

Learn More

Q-Shields are applied to the top of the glass collection vials for the EDGE Extraction System. The disposable aluminum shields help to eliminate splashing and minimize evaporation of the extract. The collection vial cap can be used as a tool to firmly apply shields.

Includes 250 Q-Shields.

Learn More

The Waste Bottle Assembly collects the waste for the 40 mL EDGE Extraction system. The 2 L bottle and cap equipped with a level sensor is connected to EDGE Extraction system by vent line tubing, drain line tubing and level sensor connector.

Learn More