EDGE Replacement Parts

View as List Grid

Items 1-10 of 31

Set Ascending Direction
  1. Waste Bottle Assembly Fittings

    Waste Bottle Assembly Fittings

    153615
    Fittings used to connect the vent line tubing and drain line tubing of the Waste Bottle Assembly to the EDGE Extraction System.

  2. Waste Bottle Assembly (40 mL EDGE System)

    Waste Bottle Assembly (40 mL EDGE System)

    525165
    The Waste Bottle Assembly collects the waste for the 40 mL EDGE Extraction system. The 2 L bottle and cap equipped with a level sensor is connected to EDGE Extraction system by vent line tubing, drain line tubing and level sensor connector.

  3. Q-Shield

    Q-Shield

    153640
    Q-Shields are applied to the top of the glass collection vials for the EDGE Extraction System. The disposable aluminum shields help to eliminate splashing and minimize evaporation of the extract. The collection vial cap can be used as a tool to firmly apply shields.

    Includes 250 Q-Shields.

  4. Q-Screen Kit

    Q-Screen Kit

    525200
    Q-Screens are inserted on top of the sample within the Q-Cup Sample Holder for the EDGE Extraction System. A tool is used to insert the reusable stainless steel screens to keep the sample firmly packed within the Q-Cup Sample Holder.

    Includes
    • 12 Q-Screens
    • Q-Screen Tool
  5. Q-Screens

    Q-Screens

    525350
    Q-Screens are inserted on top of the sample within the Q-Cup Sample Holder for the EDGE Extraction System. A tool is used to insert the reusable stainless steel screens to keep the sample firmly packed within the Q-Cup Sample Holder.

    Includes
    • 1 Q-Screen
  6. Q-Matrix Hydra

    Q-Matrix Hydra

    CHEM-0004
    Q-Matrix Hydra, a polymer super absorbent, is used within the Q-Cup Sample Holder to aid in the removal of water from the sample for the EDGE Extraction System.

    Includes 500 g of Q-Matrix Hydra.

  7. EDGE cellulose filtration discs C4

    Q-Disc C4

    153016
    Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C4 discs are thin 11 µm cellulose filters recommended for extraction applications of dry or wet samples. These discs are suitable for GC or Gravimetric analysis.

    Includes 500 C4 Q-Discs.

  8. Q-Disc C1

    Q-Disc C1

    152991
    Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C1 discs are thin 2.5 µm cellulose filters recommended for extraction applications of dry samples. These discs are suitable for GC or Gravimetric analysis.

    Includes 500 C1 Q-Discs.

  9. Q-Cup Set

    Q-Cup Set

    905955
    Q-Cups are coated aluminum sample holders for the EDGE Extraction System. Q-Cups consist of a cylinder piece which holds the sample, and a threaded bottom piece which holds the Q-Disc filter. This kit includes 12 Q-Cups, which is the maximum number of samples that can be extracted in a run. For efficiency, it's recommended to have two sets (24 Q-Cups) and two Glass Vial Racks. This would allow one set to be ran in an EDGE, while another set is being prepared.

    Includes
    • 12 Q-Cup Cylinders
    • 12 Q-Cup Threaded Bottoms

  10. Calibration Tool Post

    Calibration Tool Post

    153415
    Calibration tool used to aid in the calibration of the EDGE Extraction Systems autosampler. The the silver post should be loaded into the postion to be calibrated on the EDGE Extraction System.

Page
per page