搜索结果: '- to c'

Adapter Ball Connector (connects Discover SP-D 80 to Explorer automation module)
了解更多

Torque Wrench (calibrated to 5 ft-lbs)
了解更多

For use with all EasyPrep Vessels.
了解更多

Luer fitting for flash column inlet
了解更多

Fmoc-Lys(palmitoyl-Glu-OtBu)-OH
了解更多

Fmoc-Lys(palmitoyl-Glu-OtBu)-OH
了解更多

The Syringe to 1/8" Fitting Adapter is used to connect a luer-tip syringe to the standard 1/8" OD tubing.
了解更多

The Bottle Tubing Bundle for Pass-Through Bottle Caps consists of two tubes use to connect pressure rated bottles to Deprotection and Main Wash positions
了解更多

155 mm glass connector adapter with 24/40 joint
了解更多

Replacement level indicator to be used with the 2-piece reaction vessel calibration stand.
了解更多

The Benchtop Air Ionizer helps removes static to aid in speed and accuracy when working with powdered samples or in low humidity environments.
了解更多

Fmoc-Trp(Boc)-OH
了解更多

Fmoc-Trp(Boc)-OH
了解更多

Fmoc-Trp(Boc)-OH
了解更多

The Q-Support is a reusable stainless steel mesh disc that is inserted on top of a Q-Disc to provide extra support. When using Q-Support a G0 Q-Disc should be used.
了解更多

Calibrate and verify the accuracy of your digestion temperature with a compact, simple to use NIST traceable calibration device.
了解更多

PFAS Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE PFAS Extraction System. These discs are tested to not contain PFAS and recommended for all sample types.

Includes 125 PFAs Q-Discs.
了解更多

Calibrate and verify the accuracy of your MARS temperature with a compact, simple to use NIST traceable calibration device.
了解更多

50-place, 120V heater block used to optimize sample temperature prior to total fat analysis when utilizing the robotic option.
了解更多

50-place, 240V heater block used to optimize sample temperature prior to total fat analysis when utilizing the robotic option.
了解更多

For ease in capping and uncapping MARSXpress Vessels.
了解更多

The Activator/Activator Base Bottle O-ring is an EPDM o-ring used to seal the activator and activator base bottles to the reagent manifold.
了解更多

30 filters for amino acid, activator and activator base dip tubes.
了解更多

300 filters for amino acid, activator and activator base dip tubes.
了解更多

Pressure regulator kit for Discover instruments
了解更多

80 mL pressure attenuator compatible with Discover SP and Discover S-Class
了解更多

The 4 mL Disposable Reaction Vessel is used to perform microcleavages.
了解更多

Undergraduate lab manual for teaching microwave assisted organic synthesis.
了解更多

Discover SP-D Plus Spill Cup Removal Tool
了解更多

10 mL Discover 2.0 and SP-D Plus Attenuator. Teflon coated corrosion resistant attenuator for use with the 10mL reaction vial.
了解更多

35 mL Discover 2.0 and Discover SP-D Plus Attenuator. Teflon coated corrosion resistant attenuator for use with the 35 mL reaction vial.
了解更多

Exhaust Blower for Discover SP-D without automation only
了解更多

Discover SP-D Fume Cabinet for 24/48 place autosampler. Fume Cabinet designed to be used with the Discover SP-D with Explorer 24/48. Includes retrofit kit PN 730099.
了解更多

Discover SP-D Fume Cabinet for 36/72 place autosampler. Fume Cabinet designed to be used with the Discover SP-D with Explorer 36/72. Includes retrofit kit PN 730099.
了解更多

Discover SP-D Fume Cabinet for 48/96 place autosampler. Fume Cabinet designed to be used with the Discover SP-D with Explorer 48/96. Includes retrofit kit PN 730099.
了解更多

TFM liner to be used in SPD-80 Quartz vessels. 6 Pack
了解更多

TFM liner to be used in SPD-80 Quartz vessels. 12 Pack
了解更多

10 mL fiber optic attenuator for the Discover S-Class system.
了解更多

Fmoc AA Kit (20 bottle kit)
了解更多

Low Inventory
Rink Amide ProTide Resin
了解更多

Low Inventory
Rink Amide ProTide Resin
了解更多

Low Inventory
Rink Amide ProTide Resin
了解更多

Low Inventory
Rink Amide ProTide Resin
了解更多

Q-Matrix Hydra, a polymer super absorbent, is used within the Q-Cup Sample Holder to aid in the removal of water from the sample for the EDGE Extraction System.

Includes 500 g of Q-Matrix Hydra.


了解更多

Assembly stand for the 100 mL reaction vessel. Includes tool for easy adapter removal
了解更多

Autosampler for sequential chemical synthesis, requires Discover 2.0 microwave reactor (sold separately). Run up to 12 reactions per queue, a mixture of 10-mL and 35-mL vessels.
了解更多

Autosampler for sequential chemical synthesis, requires Discover 2.0 microwave reactor (sold separately). Run up to 48 reactions per queue, a mixture of 10-mL and 35-mL vessels.
了解更多

-
了解更多

A polymer super absorbent; tested to not contain PFAS, is used within the sample holder to aid in the dispersive removal of water and impurities during the solvent extraction of PFAS from solid or semi-solid samples.
了解更多

Turntable designed to hold 40 standard 50 mL centrifuge tubes with cap. The HT-50 is designed for the extraction of PFAS from solid samples using IR temperature control.
了解更多

Replacement attenuator for the 35-mL reaction vessel for use in Discover SP.
了解更多

Analyze large batches unattended on the ORACLE.
了解更多

The Resin Distributor kit includes an adaptor block that holds the 96-well synthesis plate, three loading plate options, and a transfer plate that houses the loading plate.
了解更多

The fiber-optic probe clip slides over the fiber-optic probe and the thermowell of the reaction vessel attenuator assembly to secure the probe.
了解更多

RV top oring
了解更多

The GL45 3-Way Pass-through Bottle Cap is used to connect the HT-12 transfer solvent bottle to the HT-12 module.
了解更多

The Amino Acid Manifold O-ring is an EPDM o-ring used to seal the amino acid bottles to the manifold.
了解更多

Straight fitting used to connect 1/4" tubing to a cooling gas source.
了解更多

80 mL flow cell attenuator and vessel top
了解更多

80 mL reaction vessel assembly, does not include a fiber optic thermowell.
了解更多

Accessory kit for short style vessels
了解更多

These screws are used to mount the 2-Way and 3-Way Liquid Valves (PNs 167850 and 167855) to the manifolds. 2.5mm
了解更多

These screws are used to mount the 3-Way LiquidX Style valves (PN 167980) to the manifolds.
了解更多

The Luer Plug is used to cap the reaction vessels during cleavage.
了解更多

Discover accessory for hydrogenation, carbonylation, or formylation reactions.
了解更多

Discover accessory for hydrogenation, carbonylation, or formylation reactions.
了解更多

Add-on option for the 80 mL Gas Addition Kit.
了解更多

10 mL fiber optic option for sealed vessels, Discover SP and Discover S-Class systems only.
了解更多

Open vessel attenuator for Discover SP and Discover S-Class system.
了解更多

Pressure sensor option for CEM Plus series vessels.
了解更多

1/4" ID inlet/outlet port for open vessel scale up
了解更多

Consists of 1x 35 mL attenuator with hole for probe, 1x 10 mL attenuator with hole for probe, 1 open vessel attenuator, 1x 35 mL vessel with integrated thermowell , 1x 10 mL vessel with integrated thermowell, fiber optic option.
了解更多

For use with Discover Legacy systems.
了解更多

The Bottle Dip Tube Filter is used in the main solvent and deprotection bottles of the Discover Bio wash station.
了解更多

Includes liners, caps, plugs, composite sleeves, turntable, and one vessel rack (not shown). Accepts fiber optic temperature control.
了解更多

Includes liners, caps, plugs, composite sleeves, turntable, and one vessel rack (not shown). Accepts fiber optic temperature control.
了解更多

TFM spill cup supplied with the Discover SPD 80 reactor. The spill cup inserts directly into cavity to protect the cavity and infrared sensor from damage due to spillage or ruptured reaction vials. Note: Cup Includes side feature for temperature. Compatible with Discover SP-D 80 Plus only
了解更多

Removable spill tank used to capture and contain reaction components and vial fragments should a reaction vial fail in the cavity of the system. These trays fit into the spill channel of the system and are installed with a thumbscrew.
了解更多

The ACT/ACT-B dip tube allows the system to draw up liquid from the ACT or ACT-B bottles.
了解更多

Our best-selling crucible. Holds up to 5g of sample. When used in the Phoenix BLACK microwave muffle furnace, up to 24 samples can be ashed at the same time. Quantity: 100
了解更多

Crucible caps are ideal for lightweight samples that are prone to blowing out of a crucible during handling. Quantity: 75
了解更多

Crucible caps are ideal for lightweight samples that are prone to blowing out of a crucible during handling. Quantity: 48
了解更多

Stainless steel rack designed to hold self-sealing crucibles during ash analysis.
了解更多

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

Fiber optic temperature control with saphire thermowell, EPS pressure, and standard Teflon coated ring.
了解更多

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

Fiber optic temperature control with saphire thermowell, EPS pressure, and standard Teflon coated ring.
了解更多

10 mL flow cell attenuator for the Discover S-Class and Discover SP. Not compatible with the Discover Legacy.
了解更多

Q-Cups are coated aluminum sample holders for the EDGE Extraction System. Q-Cups consist of a cylinder piece which holds the sample, and a threaded bottom piece which holds the Q-Disc filter. This kit includes 12 Q-Cups, which is the maximum number of samples that can be extracted in a run. For efficiency, it's recommended to have two sets (24 Q-Cups) and two Glass Vial Racks. This would allow one set to be ran in an EDGE, while another set is being prepared.

Includes

• 12 Q-Cup Cylinders
• 12 Q-Cup Threaded Bottoms

了解更多

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C1 discs are thin 2.5 µm cellulose filters recommended for extraction applications of dry samples. These discs are suitable for GC or Gravimetric analysis.

Includes 500 C1 Q-Discs.


了解更多

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C4 discs are thin 11 µm cellulose filters recommended for extraction applications of dry or wet samples. These discs are suitable for GC or Gravimetric analysis.

Includes 500 C4 Q-Discs.


了解更多

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The M1 discs are thin 0.25 µm membrane filters recommended for extraction applications of dry samples. These discs are suitable for LC, GC or Gravimetric analysis.

Includes 250 M1 Q-Discs


了解更多

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C3 discs are thin 7 µm cellulose filters recommended for extraction applications of dry samples. These discs are suitable for GC or Gravimetric analysis.

Includes 250 C3 Q-Discs.


了解更多

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C7 discs are thin 20 µm cellulose filters recommended for extraction applications of dry or wet samples. These discs are suitable for GC or Gravimetric analysis.

Includes 250 C7 Q-Discs.


了解更多

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

Fiber optic temperature only control with saphire thermowell and standard Teflon coated ring.
了解更多

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

Fiber optic temperature only control with saphire thermowell and standard Teflon coated ring.
了解更多

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

iWave temperature control and standard Teflon coated ring.
了解更多

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

iWave temperature control and standard Teflon coated ring.
了解更多

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

Fiber optic temperature control with saphire thermowell, EPS pressure, and premium ring.
了解更多

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

Fiber optic temperature control with saphire thermowell, EPS pressure, and premium ring.
了解更多

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

Fiber optic temperature only control with saphire thermowell and Premium ring.
了解更多

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

Fiber optic temperature only control with saphire thermowell and Premium ring.
了解更多

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

iWave temperature control and premium ring.
了解更多

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

iWave temperature control and premium ring.
了解更多

Replacement label for MARSXpress turntables top label.
了解更多

The ashing cover fits into the crucible and reduces the risk of cross contamination or ash loss. Quantity: 200
了解更多

The ashing cover fits into the crucible and reduces the risk of cross contamination or ash loss. Quantity: 200
了解更多

The ashing cover fits into the crucible and reduces the risk of cross contamination or ash loss. Quantity: 100
了解更多

Includes everything needed for MARSXpress Plus Glass Vessel set. For iWave only temperature control.
了解更多

Includes everything needed to upgrade a 24-Place MARSXpress Plus, 110 mL, TFM vessel set into a Disposable Glass Vessel set.
了解更多

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The M2 discs are thin 0.25 µm membrane filters recommended for extraction applications of wet or dry samples. These discs are suitable for LC, GC or Gravimetric analysis. The C9 discs must be used underneath the M2 discs to provide structural support during extraction.

Includes

• 500 M2 Q-Discs
• 500 C9 Q-Discs

了解更多

Q-Screens are inserted on top of the sample within the Q-Cup Sample Holder for the EDGE Extraction System. A tool is used to insert the reusable stainless steel screens to keep the sample firmly packed within the Q-Cup Sample Holder.

Includes

• 12 Q-Screens
• Q-Screen Tool

了解更多

This wrench is pre-calibrated to provide the proper torque to all 2-way valve adjustments and should always be used when replacing the 2-way valves. The wrench is located inside the back door of the Liberty.
了解更多

The type K Dual-Element High Temperature Thermocouple contains two thermocouples in one sheath. While one thermocouple controls the operating temperature, the second thermocouple can be connected to a digital thermometer to verify the accuracy of the controlling thermocouple. It is NIST-traceable with a certificate of calibration.
了解更多

The type K Dual-Element High Capacity Thermocouple contains two thermocouples in one sheath. While one thermocouple controls the operating temperature, the second thermocouple can be connected to a digital thermometer to verify the accuracy of the controlling thermocouple. It is NIST-traceable with a certificate of calibration.
了解更多

This kit provides all parts required to upgrade a system using the 1-piece reaction vessel to a 2-piece reaction vessel. Includes a calibration stand (P/N 551625), 30-mL 2-piece reaction vessel assembly (P/N 551605), and 20 pack of frits (P/N 551600).
了解更多

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C2 discs are thin 5 µm cellulose filters recommended for extraction applications of dry or wet samples. These discs are suitable for LC, GC or Gravimetric analysis.

Includes

• 250 C2 Q-Discs

了解更多

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The G0 discs are thin 0.3 µm glass fiber filters recommended for extraction applications of dry or wet samples. These discs are suitable for LC, GC or Gravimetric analysis. When using G0 a Q-Support must also be used.

Includes 250 G0 Q-Discs.
了解更多

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The D2 discs are 1 µm polypropylene depth filters that can be used for PFAS extraction.

Includes

• 125 D2 Q-Discs

了解更多

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The S1 discs are a stack of C9 + G1 + C9 Q-Disc recommended for all applications.

Includes

• 125 S1 Q-Discs

了解更多

This kit provides all parts required to upgrade a system using the 1-piece reaction vessel to a 2-piece reaction vessel. Includes a calibration stand (P/N 551625), 125-mL 2-piece reaction vessel assembly (P/N 551535), and 20 pack of frits (P/N 551770).
了解更多

PEEK, one-piece hex-head long, 10-32 fittings for connecting the collector manifold tubings to the collector valve
了解更多

Fitting to connect to flash column outlet
了解更多

PTFE Coil to provide a delay time between the detector flow cell and collector valve. Optimized for flow rates of 4-8 mL/min (typical of 10 mm ID columns).
了解更多

PTFE Coil to provide a delay time between the detector flow cell and collector valve. Optimized for flow rates of 15-45 mL/min (typical of 20 - 30 mm ID columns).
了解更多

Q-Screens are inserted on top of the sample within the Q-Cup Sample Holder for the EDGE Extraction System. A tool is used to insert the reusable stainless steel screens to keep the sample firmly packed within the Q-Cup Sample Holder.

Includes

• 1 Q-Screen

了解更多

12-place, 120V heater block with insulated cover. Used to maintain the appropriate temperature for the normalization kit.
了解更多

12-place, 240V heater block with insulated cover. Used to maintain the appropriate temperature for the normalization kit.
了解更多

50-place, 120V heater block used to optimize sample temperature prior to total fat analysis.

*Not compatible with the ORACLE + Robot option.
了解更多

50-place, 240V heater block used to optimize sample temperature prior to total fat analysis.

*Not compatible with the ORACLE + Robot option.
了解更多

Replacement parts for MARSXpress Vessels
了解更多

The Thermowell with Resin Disruptor is a sapphire sheath used to protect the fiber-optic temperature probe.
了解更多

The 120 mL Amino Acid Bottle is a larger reservoir for use on the Amino Acids on the Liberty Blue and Resin positions on the 12 and 24 position High Throughput modules.
了解更多

Discover SP-D Clinical and Discover SP-D cavity spill cup
了解更多

Removable reaction vessel for sub-ambient temperature reactions.
了解更多

For addition of microwave-transparent cooling fluid to CoolMate reservoir.
了解更多

The 2-Way Liquid valve is used on the Liberty Blue to control the flow of liquid and gas through the system.
了解更多

The 4 mL Reaction Vessel Holder is used with the disposable 4 mL reaction vessels to perform microcleavages.
了解更多

Vessel accessory kit for enzymatic digestion applications.
了解更多

For use in Discover SP, Discover SP-D Clinical, and Discover SP-D
了解更多

Discover software controller option
了解更多

Add-on option for the MARS 6
了解更多

Scale-up synthesis and extraction vessel set
了解更多

Scale-up synthesis and extraction vessel set
了解更多

Adds pressure monitoring to an existing Discover 1 system. 10 mL vessel only.
了解更多

Discover accessory for hydrogenation, carbonylation, or formylation reactions.
了解更多

Discover accessory for hydrogenation, carbonylation, or formylation reactions.
了解更多

Add-on option for the 80 mL Gas Addition Kit for Discover Legacy systems.
了解更多

80 mL reaction vessel assembly, does not include a fiber optic thermowell.
了解更多

Removable reaction vessel for sub-ambient temperature reactions.
了解更多

This kit contains a box of (100) 10 mL vessels and a box of (100) PTFE-Silicon septa with snap-top caps.
了解更多

Torque Stand
了解更多

Use with Torque Wrench, Part 404070 or 432201
了解更多

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
了解更多

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
了解更多

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
了解更多

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
了解更多

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
了解更多

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
了解更多

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples with 50 mL measurement line for easy dilutions.
了解更多

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
了解更多

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples with 50 mL measurement line for easy dilutions.
了解更多

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
了解更多

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples with 50 mL measurement line for easy dilutions.
了解更多

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
了解更多

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples with 50 mL measurement line for easy dilutions.
了解更多

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
了解更多

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples with 50 mL measurement line for easy dilutions.
了解更多

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
了解更多

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
了解更多

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
了解更多

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
了解更多

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
了解更多

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
了解更多

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
了解更多

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
了解更多

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
了解更多

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
了解更多

RJ12 adaptor for the Discover S-Class and Discover SP.
了解更多

Holds up to 4 iPrep vessel assemblies for convenient and safe movement around the lab.
了解更多

iPrep Torque tool featuring 21 inch lbs. of torque.
了解更多

This all-in-one-tool contains an iPrep Torque tool assembly featuring 21 inch lbs. of torque for simple one-click assembly and has an attachable removal tool for ease of use during disassembly.
了解更多

Pronged removal tool for iPrep vessels for ease of use during disassembly.
了解更多

Integrated Camera Upgrade
了解更多

Integrated Camera Upgrade
了解更多

Glass vials to collect the extract placed in the rack for the EDGE Extraction system. These glass collection vials are clear, 40 mL, pre-sterilized and capped.

Includes 72 vials.


了解更多

Glass vials to collect the extract placed in the rack for the EDGE Extraction system. These glass collection vials are graduated, 40 mL, pre-sterilized and capped.

Includes 72 vials.


了解更多

Glass vials to collect the extract placed in the rack for the EDGE Extraction system. These glass collection vials are amber, 40 mL, pre-sterilized and capped.

Includes 72 vials.


了解更多

Glass vials to collect the extract placed in the rack for the EDGE Extraction system. These glass vials collection are clear, 60 mL, pre-sterilized and capped.

Includes 72 vials.


了解更多

Glass vials to collect the extract placed in the rack for the EDGE Extraction system. These glass vials collection are amber, 60 mL, pre-sterilized and capped.

Includes 72 vials.


了解更多

Single-use, disposable, 20 mL cleavage syringes for use with the Razor Parallel Cleavage System (pack of 60)
了解更多

Q-Shields are applied to the top of the glass collection vials for the EDGE Extraction System. The disposable aluminum shields help to eliminate splashing and minimize evaporation of the extract. The collection vial cap can be used as a tool to firmly apply shields.

Includes 250 Q-Shields.


了解更多

Pressure rated bottle typically used for Deprotection
了解更多

Pressure rated bottle typically used for Main Wash
了解更多

Pressure rated bottle typicaly used for Activator and Activator Base
了解更多

Single-use, disposable, 35 mL cleavage syringes for use with the Razor Parallel Cleavage System (pack of 60).
了解更多

The amino acid dip tube allows the system to draw up amino acid solution.
了解更多

20L Waste Carboy Option
了解更多

Includes four sealed standards of varying oil content and instructions for setup and use.
了解更多

Kit for pump head maintenance: set of gaskets, 2 piston rods, 2 sapphire backing rings, 2 O-rings. Part of annual preventative maintenance.
了解更多

Replacement Cartridge (40 psi) for back-pressure regulator holder/assembly. Constructed with PEEK, Tefzel (EFTE), PCTFE, and gold plated stainless steel spring.
了解更多

Luer-lock, stainless steel, 16 GA needle for manual injector
了解更多

Flow cell for semi-prep to prep applications (low to medium sample loading). Stainless steel construction, 2 uL volume, 300 bar pressure limit
了解更多

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
了解更多

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
了解更多

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
了解更多

The Liberty Blue™ HT12 System Upgrade converts a Discover to an automated microwave peptide synthesizer designed for Fmoc solid phase peptide synthesis.
了解更多

The Liberty Blue™ HT24 System Upgrade converts a Discover to an automated microwave peptide synthesizer designed for Fmoc solid phase peptide synthesis.
了解更多

35 mL pressure rated vessels, pack of 25. The 35 mL pressure vessels have a working volume of 2.0-25.0 mL and are rated up to 300 psi. (Not compatible with Discover Benchmate or Labmate.)
了解更多

10 mL Pyrex pressure rated vessels, pack of 100.
了解更多

The HT Transfer Solvent Bottle Tubing Bundle is used to connect the transfer solvent bottle to the HT-12 module.
了解更多

Discover software package.
了解更多

Add-on temperature control option for MARSXpress vessels
了解更多

Open vessel support for glassware 250mL-5L.
了解更多

This kit contains a box of (100) PTFE-Silicon septa with snap-top caps. (Not compatible with Discover SP or 2.0.)
了解更多

The Gas Addition spare parts kit includes the following: 

• Pressure line assembly
• 1/8" PFA tubing
• Yellow ferrules
• 1/8" flangeless nut
• Tubing cutter
• Fitting removal tool
• Wrench
• 80 mL cleaning kit
• Fiber optic probe

 

 

 

 

 

了解更多

了解更多

了解更多

iPrep Vessel Holder Holds up to a full set of iPrep vessel liners.
了解更多

了解更多

了解更多

Includes: 25-4 mL Pyrex Vessels and 100 Caps
了解更多

4 mL Pyrex pressure rated vessel, pack of 1.
了解更多

4 mL Quartz pressure rated vessel, pack of 1.
了解更多

Transform your Phoenix BLACK into a workstation for automatic calculation, storage and transfer of results. This will assist you in complying with CFR 11 Part 21, ISO and other QC requirements. For use in countries with 208-240V and 50/60HZ power supply.
了解更多

Back-pressure regulator assembly, including holder, replaceable cartridge, fittings and ferrules. Installed after the detector to prevent bubble formation in the flow cell.
了解更多