EDGE PFAS

Calibration tool used to aid in the calibration of the EDGE Extraction Systems autosampler. The the black cap should be inserted into the autosampler fork.


Mehr erfahren

Calibration tool used to aid in the calibration of the EDGE Extraction Systems autosampler. The the silver post should be loaded into the postion to be calibrated on the EDGE Extraction System.


Mehr erfahren

Fittings used to connect the vent line tubing and drain line tubing of the Waste Bottle Assembly to the EDGE Extraction System.


Mehr erfahren

The side enclosure attaches to the open side of the EDGE and can be used to increase the airflow and create a clean environment in the rack area.

Compatible with the 60 mL EDGE system only. Refer to part 525320 for the for the side enlcosure for the 40 mL EDGE system.
Mehr erfahren

The Waste Bottle Assembly collects the waste for the 60 mL EDGE Extraction system. The 2 L bottle and cap equipped with a level sensor is connected to EDGE Extraction system by vent line tubing, drain line tubing and level sensor connector.
Mehr erfahren

Removable rack for the 60 mL EDGE Extraction system that holds twelve Q-Cup Sample Holders and twelve 50 mL centrifuge tubes.


Mehr erfahren

Barcode scanner
Mehr erfahren

Polypropylene solvent bottle caps for GL45 threaded bottles connected to the EDGE PFAS Extraction System
Mehr erfahren

A polymer super absorbent; tested to not contain PFAS, is used within the sample holder to aid in the dispersive removal of water and impurities during the solvent extraction of PFAS from solid or semi-solid samples.
Mehr erfahren

PFAS Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE PFAS Extraction System. These discs are tested to not contain PFAS and recommended for all sample types.

Includes 125 PFAs Q-Discs.
Mehr erfahren