Suchergebnisse für "5 g 29"

5 mL sample loop, 1/16" OD (0.04" ID) stainless steel

Part # 229475

Small sample loop ideal for low volume (< 5 mL) injections. Provides best resolution for small scale separations in both ambient and elevated temperature conditions. Can be used as a sample loop/pre-heating coil for 4-8 mL/min purifications using the column oven and 10 mm ID columns.
Mehr erfahren

Delay Coil for 15-45 mL/min (2.3 m length, 1 mm ID)

Part # 229495

PTFE Coil to provide a delay time between the detector flow cell and collector valve. Optimized for flow rates of 15-45 mL/min (typical of 20 - 30 mm ID columns).
Mehr erfahren

Glass Extension, 11.5 in (29.2 cm)

Part # 135030

11.5 in (29.2 cm) glass extender for open vessel work in the MARS 6 Synthesis.
Mehr erfahren

ESP Plus Pressure Sensor Assembly

Part # 512290

Pressure Sensor Assembly for MARS 6
Mehr erfahren

ESP Plus Pressure Sensor Option

Part # 512290-C

Pressure sensor option for CEM Plus series vessels.
Mehr erfahren

Q-Disc C1

Part # 152991

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C1 discs are thin 2.5 µm cellulose filters recommended for extraction applications of dry samples. These discs are suitable for GC or Gravimetric analysis.

Includes 500 C1 Q-Discs.

Mehr erfahren

1/8" to 1/16" reducer

Part # 229285

Reducer fitting to enable 1/16" OD capillary connections to 1/8" female fitting on stator of manual valve
Mehr erfahren

Delay Coil for 4-8 mL/min (2 m length, 0.5 mm ID)

Part # 229490

PTFE Coil to provide a delay time between the detector flow cell and collector valve. Optimized for flow rates of 4-8 mL/min (typical of 10 mm ID columns).
Mehr erfahren