Resultados de búsqueda para: '- to'

Syringe to 1/8" Fitting Adapter
Part # 1648300,00 US$The Syringe to 1/8" Fitting Adapter is used to connect a luer-tip syringe to the standard 1/8" OD tubing.
Saber más
Torque Wrench (calibrated to 5 ft-lbs)
Part # 432201Torque Wrench (calibrated to 5 ft-lbs)
Saber más
10-32 Female to Female Luer, Flash Column Fitting
Part # 230510Luer fitting for flash column inlet
Saber más
Adapter Ball Connector (connects Discover SP-D 80 to Explorer automation module)
Part # 190480Adapter Ball Connector (connects Discover SP-D 80 to Explorer automation module)
Saber más
Fmoc-Lys(palmitoyl-Glu-OtBu)-OH - 5 g
Part # A043-B529,00 US$Fmoc-Lys(palmitoyl-Glu-OtBu)-OH
Saber más
Fmoc-Lys(palmitoyl-Glu-OtBu)-OH - 1 g
Part # A043-A147,00 US$Fmoc-Lys(palmitoyl-Glu-OtBu)-OH
Saber más
Bottle Tubing Bundle for Pass-Through Bottle Caps
Part # 216780-MThe Bottle Tubing Bundle for Pass-Through Bottle Caps consists of two tubes use to connect pressure rated bottles to Deprotection and Main Wash positions
Saber más
155 mm Connector Adapter
Part # SP-11600,00 US$155 mm glass connector adapter with 24/40 joint
Saber más
Level Indicator
Part # 217420-M0,00 US$Replacement level indicator to be used with the 2-piece reaction vessel calibration stand.
Saber más
Anti-Static Ionizer
Part # 928154-1The Benchtop Air Ionizer helps removes static to aid in speed and accuracy when working with powdered samples or in low humidity environments.
Saber más





Q-Matrix Hydra
Part # CHEM-0004Q-Matrix Hydra, a polymer super absorbent, is used within the Q-Cup Sample Holder to aid in the removal of water from the sample for the EDGE Extraction System.
Includes 500 g of Q-Matrix Hydra.
Saber más
Q-Support 24 pack
Part # 154400-24The Q-Support is a reusable stainless steel mesh disc that is inserted on top of a Q-Disc to provide extra support. When using Q-Support a G0 Q-Disc should be used.
Saber más
Autosampler 12 Upgrade
Part # 925164-1Autosampler for sequential chemical synthesis, requires Discover 2.0 microwave reactor (sold separately). Run up to 12 reactions per queue, a mixture of 10-mL and 35-mL vessels.
Saber más
Autosampler 48 Upgrade
Part # 925166-1Autosampler for sequential chemical synthesis, requires Discover 2.0 microwave reactor (sold separately). Run up to 48 reactions per queue, a mixture of 10-mL and 35-mL vessels.
Saber más
AutoCal 2.0
Part # 920103-1Calibrate and verify the accuracy of your digestion temperature with a compact, simple to use NIST traceable calibration device.
Saber más
HT-50 Turntable
Part # 50-000006Turntable designed to hold 40 standard 50 mL centrifuge tubes with cap. The HT-50 is designed for the extraction of PFAS from solid samples using IR temperature control.
Saber más
Q-Disc PFAS
Part # 15-000001PFAS Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE PFAS Extraction System. These discs are tested to not contain PFAS and recommended for all sample types.
Includes 125 PFAs Q-Discs.
Saber más
AutoCal 2.0 for MARS
Part # 920104-1Calibrate and verify the accuracy of your MARS temperature with a compact, simple to use NIST traceable calibration device.
Saber más
120V, 50-Place Heater Block, ORACLE + Robot
Part # NP-137850-place, 120V heater block used to optimize sample temperature prior to total fat analysis when utilizing the robotic option.
Saber más
240V, 50-Place Heater Block, ORACLE + Robot
Part # NP-137950-place, 240V heater block used to optimize sample temperature prior to total fat analysis when utilizing the robotic option.
Saber más
MultiPep Resin Distributor
Part # 50-0000670,00 US$The Resin Distributor kit includes an adaptor block that holds the 96-well synthesis plate, three loading plate options, and a transfer plate that houses the loading plate.
Saber más
MARSXpress Capping Station
Part # 927080-1For ease in capping and uncapping MARSXpress Vessels.
Saber más
Activator/Activator Base Bottle O-ring
Part # BR853047The Activator/Activator Base Bottle O-ring is an EPDM o-ring used to seal the activator and activator base bottles to the reagent manifold.
Saber más
Reagent Dip Tube Filters, pack of 30
Part # 551005-M30 filters for amino acid, activator and activator base dip tubes.
Saber más
Reagent Dip Tube Filters, pack of 300
Part # 551005-3C300 filters for amino acid, activator and activator base dip tubes.
Saber más
80 mL Attenuator for Discover SP and Discover S-Class
Part # 54438080 mL pressure attenuator compatible with Discover SP and Discover S-Class
Saber más
4 mL Disposable Reaction Vessel (bag of 50)
Part # 547150-MThe 4 mL Disposable Reaction Vessel is used to perform microcleavages.
Saber más
Luer Plug (bag of 25)
Part # 167999-MThe Luer Plug is used to cap the reaction vessels during cleavage.
Saber más
ESP Plus Pressure Sensor Option
Part # 512290-CPressure sensor option for CEM Plus series vessels.
Saber más
Clean, Fast, Organic Chemistry: Microwave-assisted Laboratory Experiments (Student Edition, Hard Copy)
Part # 400130Undergraduate lab manual for teaching microwave assisted organic synthesis.
Saber más
Bottle Dip Tube Filter
Part # 167485-M0,00 US$The Bottle Dip Tube Filter is used in the main solvent and deprotection bottles of the Discover Bio wash station.
Saber más
Discover SP-D Plus Spill Cup Removal Tool
Part # 191390Discover SP-D Plus Spill Cup Removal Tool
Saber más
10 mL Discover 2.0 and SP-D Plus Attenuator
Part # 52636510 mL Discover 2.0 and SP-D Plus Attenuator. Teflon coated corrosion resistant attenuator for use with the 10mL reaction vial.
Saber más
35 mL Discover 2.0 and SP-D Plus Attenuator
Part # 52637035 mL Discover 2.0 and Discover SP-D Plus Attenuator. Teflon coated corrosion resistant attenuator for use with the 35 mL reaction vial.
Saber más
Exhaust Blower for Discover SP-D without automation only
Part # 526140Exhaust Blower for Discover SP-D without automation only
Saber más
Discover SP-D Fume Cabinet for 24/48 place autosampler
Part # 927118Discover SP-D Fume Cabinet for 24/48 place autosampler. Fume Cabinet designed to be used with the Discover SP-D with Explorer 24/48. Includes retrofit kit PN 730099.
Saber más
Discover SP-D Fume Cabinet for 36/72 place autosampler
Part # 927116Discover SP-D Fume Cabinet for 36/72 place autosampler. Fume Cabinet designed to be used with the Discover SP-D with Explorer 36/72. Includes retrofit kit PN 730099.
Saber más
Discover SP-D Fume Cabinet for 48/96 place autosampler
Part # 927136Discover SP-D Fume Cabinet for 48/96 place autosampler. Fume Cabinet designed to be used with the Discover SP-D with Explorer 48/96. Includes retrofit kit PN 730099.
Saber más
TFM Liner, pack of 12
Part # 404190-12TFM liner to be used in SPD-80 Quartz vessels. 12 Pack
Saber más
10 mL Fiber Optic Attenuator, Discover S-Class
Part # 51012010 mL fiber optic attenuator for the Discover S-Class system.
Saber más

MARSXpress Turntable Label, Top (positions 1-16)
Part # 166030Replacement label for MARSXpress turntables top label.
Saber más
Discover 2.0 100 mL Vessel Stand
Part # 209480-MAssembly stand for the 100 mL reaction vessel. Includes tool for easy adapter removal
Saber más
Discover SP 35-mL Attenuator
Part # 526135Replacement attenuator for the 35-mL reaction vessel for use in Discover SP.
Saber más
Thermowell Assembly with Resin Disruptor
Part # 551145The Thermowell with Resin Disruptor is a sapphire sheath used to protect the fiber-optic temperature probe.
Saber más
Fiber-Optic Probe Clip
Part # 516020The fiber-optic probe clip slides over the fiber-optic probe and the thermowell of the reaction vessel attenuator assembly to secure the probe.
Saber más
GL45 3-Way Pass-through Bottle Cap
Part # 217270The GL45 3-Way Pass-through Bottle Cap is used to connect the HT-12 transfer solvent bottle to the HT-12 module.
Saber más
Amino Acid Manifold O-ring
Part # 167735The Amino Acid Manifold O-ring is an EPDM o-ring used to seal the amino acid bottles to the manifold.
Saber más
Straight Quick-Disconnect Fitting
Part # BR163380Straight fitting used to connect 1/4" tubing to a cooling gas source.
Saber más
80 mL Flow Cell for Discover SP and Discover S-Class
Part # 90863580 mL flow cell attenuator and vessel top
Saber más
80 mL Reaction Vial Pressure Accessory for the Discover SP and Discover S-Class
Part # 9089200,00 US$80 mL reaction vessel assembly, does not include a fiber optic thermowell.
Saber más
CoolMate Accessory Kit for the Discover SP and Discover S-Class
Part # 908715Accessory kit for short style vessels
Saber más
3-Way Liquid Valve (LiquidX Style)
Part # 167980The 2-Way Liquid valve is used on the Liberty Blue to control the flow of liquid and gas through the system.
Saber más
Mounting Screws for 2-Way and 3-Way Liquid Valves
Part # BR196436These screws are used to mount the 2-Way and 3-Way Liquid Valves (PNs 167850 and 167855) to the manifolds. 2.5mm
Saber más
Mounting Screws for 3-Way Valves (LiquidX Style)
Part # BR800033These screws are used to mount the 3-Way LiquidX Style valves (PN 167980) to the manifolds.
Saber más
Low Pressure Regulator Assembly
Part # 5511610,00 US$This regulator assembly is used to set the low pressure for systems with the HT-12 or HT-24 options installed.
Saber más
10 mL Gas Addition Kit for Discover SP and Discover S-Class Systems
Part # 908255Discover accessory for hydrogenation, carbonylation, or formylation reactions.
Saber más
80 mL Gas Addition Kit for Discover SP and Discover S-Class Systems
Part # 925530Discover accessory for hydrogenation, carbonylation, or formylation reactions.
Saber más
10 mL Fiber Optic Vessel Assembly for Discover SP and Discover S-Class Systems
Part # 510125Add-on option for the 80 mL Gas Addition Kit.
Saber más
10 mL Fiber Optic Vessel Option for Discover SP and Discover S-Class
Part # 90882510 mL fiber optic option for sealed vessels, Discover SP and Discover S-Class systems only.
Saber más
10 mL Attenuator
Part # 526011For use in Discover SP, Discover SP-D Clinical, and Discover SP-D
Saber más
Discover SP Open Vessel Attenuator
Part # 544300Open vessel attenuator for Discover SP and Discover S-Class system.
Saber más
Discover SP-D Calibration Kit
Part # 730075Consists of 1x 35 mL attenuator with hole for probe, 1x 10 mL attenuator with hole for probe, 1 open vessel attenuator, 1x 35 mL vessel with integrated thermowell , 1x 10 mL vessel with integrated thermowell, fiber optic option.
Saber más
Vessel holder -magnet
Part # 191525Vessel holder with magnet to hold stir bar when pouring
Saber más
24-Place MARSXpress Plus Vessel Starter Set, 110 mL, TFM AVTC
Part # 911014Includes liners, caps, plugs, composite sleeves, turntable, and one vessel rack (not shown). Accepts fiber optic temperature control.
Saber más
16-Place MARSXpress Plus Vessel Starter Set, 110 mL, TFM AVTC
Part # 911012Includes liners, caps, plugs, composite sleeves, turntable, and one vessel rack (not shown). Accepts fiber optic temperature control.
Saber más
Spill Cup, Teflon for Discover SP-D 80
Part # 147220TFM spill cup supplied with the Discover SPD 80 reactor. The spill cup inserts directly into cavity to protect the cavity and infrared sensor from damage due to spillage or ruptured reaction vials. Note: Cup Includes side feature for temperature. Compatible with Discover SP-D 80 Plus only
Saber más
Spill Tray, large for Discover SP-D 80
Part # 147050Removable spill tank used to capture and contain reaction components and vial fragments should a reaction vial fail in the cavity of the system. These trays fit into the spill channel of the system and are installed with a thumbscrew.
Saber más
ACT/ACT-B Dip Tube
Part # 216425The ACT/ACT-B dip tube allows the system to draw up liquid from the ACT or ACT-B bottles.
Saber más
20 mL Quartz-Fiber Crucible
Part # 303040Our best-selling crucible. Holds up to 5g of sample. When used in the Phoenix BLACK microwave muffle furnace, up to 24 samples can be ashed at the same time. Quantity: 100
Saber más
50 mL Quartz-Fiber Crucible Cap
Part # 303061Crucible caps are ideal for lightweight samples that are prone to blowing out of a crucible during handling. Quantity: 75
Saber más
100 mL Quartz-Fiber Crucible Cap
Part # 303071Crucible caps are ideal for lightweight samples that are prone to blowing out of a crucible during handling. Quantity: 48
Saber más
Rack for Self-Sealing, Crucibles
Part # 302060Stainless steel rack designed to hold self-sealing crucibles during ash analysis.
Saber más
12-Place EasyPrep Plus Full Starter Set, TFM, Temp & Pressure, Fiber Optic, Standard Ring
Part # 910930Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.
Fiber optic temperature control with saphire thermowell, EPS pressure, and standard Teflon coated ring.
Saber más
6-Place EasyPrep Plus Mini Starter Set, TFM, Temp & Pressure, Fiber Optic, Standard Ring
Part # 910932Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.
Fiber optic temperature control with saphire thermowell, EPS pressure, and standard Teflon coated ring.
Saber más
10 mL Flow Cell Attenuator
Part # 54461010 mL flow cell attenuator for the Discover S-Class and Discover SP. Not compatible with the Discover Legacy.
Saber más
iPrep Torque Tool Assembly
Part # 512411This all-in-one-tool contains an iPrep Torque tool assembly featuring 21 inch lbs. of torque for simple one-click assembly and has an attachable removal tool for ease of use during disassembly.
Saber más
iPrep Removal Tool
Part # 181540Pronged removal tool for iPrep vessels for ease of use during disassembly.
Saber más
Q-Cup Set
Part # 905955Q-Cups are coated aluminum sample holders for the EDGE Extraction System. Q-Cups consist of a cylinder piece which holds the sample, and a threaded bottom piece which holds the Q-Disc filter. This kit includes 12 Q-Cups, which is the maximum number of samples that can be extracted in a run. For efficiency, it's recommended to have two sets (24 Q-Cups) and two Glass Vial Racks. This would allow one set to be ran in an EDGE, while another set is being prepared.
Includes
- 12 Q-Cup Cylinders
- 12 Q-Cup Threaded Bottoms
Saber más
Q-Disc C1
Part # 152991Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C1 discs are thin 2.5 µm cellulose filters recommended for extraction applications of dry samples. These discs are suitable for GC or Gravimetric analysis.
Includes 500 C1 Q-Discs.
Saber más
Q-Disc C4
Part # 153016Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C4 discs are thin 11 µm cellulose filters recommended for extraction applications of dry or wet samples. These discs are suitable for GC or Gravimetric analysis.
Includes 500 C4 Q-Discs.
Saber más
Q-Disc M1
Part # 153026Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The M1 discs are thin 0.25 µm membrane filters recommended for extraction applications of dry samples. These discs are suitable for LC, GC or Gravimetric analysis.
Includes 250 M1 Q-Discs
Saber más
Q-Disc C3
Part # 153505Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C3 discs are thin 7 µm cellulose filters recommended for extraction applications of dry samples. These discs are suitable for GC or Gravimetric analysis.
Includes 250 C3 Q-Discs.
Saber más
Q-Disc C7
Part # 153511Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C7 discs are thin 20 µm cellulose filters recommended for extraction applications of dry or wet samples. These discs are suitable for GC or Gravimetric analysis.
Includes 250 C7 Q-Discs.
Saber más
12-Place EasyPrep Plus Full Starter Set, Temp Only, Fiber Optic, Standard Ring
Part # 910944Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.
Fiber optic temperature only control with saphire thermowell and standard Teflon coated ring.
Saber más
6-Place EasyPrep Plus Mini Starter Set, Temp Only, Fiber Optic, Standard Ring
Part # 910942Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.
Fiber optic temperature only control with saphire thermowell and standard Teflon coated ring.
Saber más
12-Place EasyPrep Full Starter Set, Temp Only, iWave, Standard Ring
Part # 911165Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.
iWave temperature control and standard Teflon coated ring.
Saber más
6-Place EasyPrep Mini Starter Set, Temp Only, iWave, Standard Ring
Part # 911170Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.
iWave temperature control and standard Teflon coated ring.
Saber más
12-Place EasyPrep Plus Full Starter Set, TFM, Temp & Pressure, Fiber Optic, Premium Ring
Part # 910955Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.
Fiber optic temperature control with saphire thermowell, EPS pressure, and premium ring.
Saber más
6-Place EasyPrep Plus Mini Starter Set, TFM, Temp & Pressure, Fiber Optic, Premium Ring
Part # 910953Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.
Fiber optic temperature control with saphire thermowell, EPS pressure, and premium ring.
Saber más
12-Place EasyPrep Plus Full Starter Set, Temp Only, Fiber Optic, Premium Ring
Part # 910954Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.
Fiber optic temperature only control with saphire thermowell and Premium ring.
Saber más
6-Place EasyPrep Plus Mini Starter Set, Temp Only, Fiber Optic, Premium Ring
Part # 910952Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.
Fiber optic temperature only control with saphire thermowell and Premium ring.
Saber más
12-Place EasyPrep Full Starter Set, Temp Only, iWave, Premium Ring
Part # 911175Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.
iWave temperature control and premium ring.
Saber más
6-Place EasyPrep Mini Starter Set, Temp Only, iWave, Premium Ring
Part # 911180Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.
iWave temperature control and premium ring.
Saber más
20 mL Quartz-Fiber Ashing Cover
Part # 201600The ashing cover fits into the crucible and reduces the risk of cross contamination or ash loss. Quantity: 200
Saber más
50 mL Quartz-Fiber Ashing Cover
Part # 201605The ashing cover fits into the crucible and reduces the risk of cross contamination or ash loss. Quantity: 200
Saber más
100 mL Quartz-Fiber Ashing Cover
Part # 201610The ashing cover fits into the crucible and reduces the risk of cross contamination or ash loss. Quantity: 100
Saber más
24-Place MARSXpress Plus Disposable Glass Vessel, Full Starter Set, 110 mL, TFM
Part # 404570Includes everything needed for MARSXpress Plus Glass Vessel set. For iWave only temperature control.
Saber más
24-Place MARSXpress Plus Disposable Glass Upgrade Kit
Part # 404575Includes everything needed to upgrade a 24-Place MARSXpress Plus, 110 mL, TFM vessel set into a Disposable Glass Vessel set.
Saber más
Q-Disc M2/C9
Part # 5251510,00 US$Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The M2 discs are thin 0.25 µm membrane filters recommended for extraction applications of wet or dry samples. These discs are suitable for LC, GC or Gravimetric analysis. The C9 discs must be used underneath the M2 discs to provide structural support during extraction.
Includes
- 500 M2 Q-Discs
- 500 C9 Q-Discs
Saber más
Q-Screen Kit
Part # 525200Q-Screens are inserted on top of the sample within the Q-Cup Sample Holder for the EDGE Extraction System. A tool is used to insert the reusable stainless steel screens to keep the sample firmly packed within the Q-Cup Sample Holder.
Includes
- 12 Q-Screens
- Q-Screen Tool
Saber más
Q-Shield
Part # 153640Q-Shields are applied to the top of the glass collection vials for the EDGE Extraction System. The disposable aluminum shields help to eliminate splashing and minimize evaporation of the extract. The collection vial cap can be used as a tool to firmly apply shields.
Includes 250 Q-Shields.
Saber más
Preset Torque Wrench
Part # 1679900,00 US$This wrench is pre-calibrated to provide the proper torque to all 2-way valve adjustments and should always be used when replacing the 2-way valves. The wrench is located inside the back door of the Liberty.
Saber más
High Temperature Dual-Element Thermocouple (NIST-traceable)
Part # 271070The type K Dual-Element High Temperature Thermocouple contains two thermocouples in one sheath. While one thermocouple controls the operating temperature, the second thermocouple can be connected to a digital thermometer to verify the accuracy of the controlling thermocouple. It is NIST-traceable with a certificate of calibration.
Saber más
High Capacity Dual-Element Thermocouple (NIST-traceable)
Part # 271065The type K Dual-Element High Capacity Thermocouple contains two thermocouples in one sheath. While one thermocouple controls the operating temperature, the second thermocouple can be connected to a digital thermometer to verify the accuracy of the controlling thermocouple. It is NIST-traceable with a certificate of calibration.
Saber más
2-Piece Reaction Vessel Upgrade Kit
Part # 551615This kit provides all parts required to upgrade a system using the 1-piece reaction vessel to a 2-piece reaction vessel. Includes a calibration stand (P/N 551625), 30-mL 2-piece reaction vessel assembly (P/N 551605), and 20 pack of frits (P/N 551600).
Saber más
Q-Disc C2
Part # 1535250,00 US$Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C2 discs are thin 5 µm cellulose filters recommended for extraction applications of dry or wet samples. These discs are suitable for LC, GC or Gravimetric analysis.
Includes
- 250 C2 Q-Discs
Saber más
Q-Disc G0
Part # 153516Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The G0 discs are thin 0.3 µm glass fiber filters recommended for extraction applications of dry or wet samples. These discs are suitable for LC, GC or Gravimetric analysis. When using G0 a Q-Support must also be used.
Includes 250 G0 Q-Discs.
Saber más
125 mL 2-piece Reaction Vessel Upgrade Kit
Part # 551785This kit provides all parts required to upgrade a system using the 1-piece reaction vessel to a 2-piece reaction vessel. Includes a calibration stand (P/N 551625), 125-mL 2-piece reaction vessel assembly (P/N 551535), and 20 pack of frits (P/N 551770).
Saber más
Collector Valve Fittings
Part # 230775PEEK, one-piece hex-head long, 10-32 fittings for connecting the collector manifold tubings to the collector valve
Saber más
1/4-28 Female - Male Luer Assy, Flash Column Fitting
Part # 230515Fitting to connect to flash column outlet
Saber más
Delay Coil for 4-8 mL/min (2 m length, 0.5 mm ID)
Part # 229490PTFE Coil to provide a delay time between the detector flow cell and collector valve. Optimized for flow rates of 4-8 mL/min (typical of 10 mm ID columns).
Saber más
Delay Coil for 15-45 mL/min (2.3 m length, 1 mm ID)
Part # 229495PTFE Coil to provide a delay time between the detector flow cell and collector valve. Optimized for flow rates of 15-45 mL/min (typical of 20 - 30 mm ID columns).
Saber más
120V, 12-Place Heater Block, ORACLE
Part # 90486512-place, 120V heater block with insulated cover. Used to maintain the appropriate temperature for the normalization kit.
Saber más
240V, 12-Place Heater Block, ORACLE
Part # 90487012-place, 240V heater block with insulated cover. Used to maintain the appropriate temperature for the normalization kit.
Saber más
120V, 50-Place Heater Block, ORACLE High Throughput
Part # 90487550-place, 120V heater block used to optimize sample temperature prior to total fat analysis.
*Not compatible with the ORACLE + Robot option.
Saber más
240V, 50-Place Heater Block, ORACLE High Throughput
Part # 90488050-place, 240V heater block used to optimize sample temperature prior to total fat analysis.
*Not compatible with the ORACLE + Robot option.
Saber más
Liberty Blue HT12 System Upgrade
Part # 925622The Liberty Blue™ HT12 System Upgrade converts a Discover to an automated microwave peptide synthesizer designed for Fmoc solid phase peptide synthesis.
Saber más
Liberty Blue HT24 System Upgrade
Part # 925624The Liberty Blue™ HT24 System Upgrade converts a Discover to an automated microwave peptide synthesizer designed for Fmoc solid phase peptide synthesis.
Saber más
120 mL Amino Acid Bottle
Part # 216560The 120 mL Amino Acid Bottle is a larger reservoir for use on the Amino Acids on the Liberty Blue and Resin positions on the 12 and 24 position High Throughput modules.
Saber más
35 mL Pressure Vessels, Pyrex
Part # 90903635 mL pressure rated vessels, pack of 25. The 35 mL pressure vessels have a working volume of 2.0-25.0 mL and are rated up to 300 psi. (Not compatible with Discover Benchmate or Labmate.)
Saber más
10 mL Pressure Vessels, Pyrex
Part # 90803510 mL Pyrex pressure rated vessels, pack of 100.
Saber más
CoolMate Reaction Vessel
Part # 168302Removable reaction vessel for sub-ambient temperature reactions.
Saber más
CoolMate Reservoir Funnel
Part # 168575For addition of microwave-transparent cooling fluid to CoolMate reservoir.
Saber más
4 mL Reaction Vessel Holder
Part # 547125The 4 mL Reaction Vessel Holder is used with the disposable 4 mL reaction vessels to perform microcleavages.
Saber más
HT Transfer Solvent Bottle Tubing Bundle
Part # 217040The HT Transfer Solvent Bottle Tubing Bundle is used to connect the transfer solvent bottle to the HT-12 module.
Saber más
Discover Proteomics Accessory Kit
Part # 908565Vessel accessory kit for enzymatic digestion applications.
Saber más
MARS 6 Xpress IR Option
Part # 512195Add-on temperature control option for MARSXpress vessels
Saber más
GreenChem Plus Full Vessel Accessory Kit, Glass
Part # 431783Scale-up synthesis and extraction vessel set
Saber más
GreenChem Plus Mini Vessel Accessory Kit, Glass
Part # 431784Scale-up synthesis and extraction vessel set
Saber más
IntelliVent Pressure Measurement and Control Option
Part # 908175Adds pressure monitoring to an existing Discover 1 system. 10 mL vessel only.
Saber más
10 mL Gas Addition Kit for Discover Legacy Systems
Part # 908250Discover accessory for hydrogenation, carbonylation, or formylation reactions.
Saber más
80 mL Gas Addition Kit for Discover Legacy Systems
Part # 925520Discover accessory for hydrogenation, carbonylation, or formylation reactions.
Saber más
10 mL Fiber Optic Vessel Assembly for Discover Legacy Systems
Part # 510115Add-on option for the 80 mL Gas Addition Kit for Discover Legacy systems.
Saber más
80 mL Reaction Vial Pressure Accessory for the Discover Legacy
Part # 90892580 mL reaction vessel assembly, does not include a fiber optic thermowell.
Saber más
CoolMate Reaction Vessel for serial # CF2025 and previous.
Part # 168300Removable reaction vessel for sub-ambient temperature reactions.
Saber más
IntelliVent Accessory Kit, Vials and Septa Only
Part # 908310This kit contains a box of (100) 10 mL vessels and a box of (100) PTFE-Silicon septa with snap-top caps.
Saber más
IntelliVent Snap Ring Septa
Part # 908140This kit contains a box of (100) PTFE-Silicon septa with snap-top caps. (Not compatible with Discover SP or 2.0.)
Saber más
40 Place MARSXpress Vessel Starter Set, 75 mL, PFA
Part # 907397The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Saber más
24 Place MARSXpress Vessel Starter Set, 75 mL, PFA
Part # 907392The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Saber más
16 Place MARSXpress Vessel Starter Set, 75 mL, PFA
Part # 907372The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Saber más
8 Place MARSXpress Vessel Starter Set, 75 mL, PFA
Part # 907367The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Saber más
8 Place MARSXpress Vessel Expansion Set, 75 mL, PFA
Part # 907427The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Saber más
40 Place MARSXpress Vessel Starter Set, 55 mL, PFA
Part # 907395The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Saber más
40 Place MARSXpress Vessel Starter Set, 55 mL, PFA, 50 mL measurement line
Part # 907396The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples with 50 mL measurement line for easy dilutions.
Saber más
24 Place MARSXpress Vessel Starter Set, 55 mL, PFA
Part # 907390The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Saber más
24 Place MARSXpress Vessel Starter Set, 55 mL, PFA, 50 mL measurement line
Part # 907391The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples with 50 mL measurement line for easy dilutions.
Saber más
16 Place MARSXpress Vessel Starter Set, 55 mL, PFA
Part # 907370The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Saber más
16 Place MARSXpress Vessel Starter Set, 55 mL, PFA, 50 mL measurement line
Part # 907371The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples with 50 mL measurement line for easy dilutions.
Saber más
8 Place MARSXpress Vessel Starter Set, 55 mL, PFA
Part # 907365The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Saber más
8 Place MARSXpress Vessel Starter Set, 55 mL, PFA, 50 mL measurement line
Part # 907366The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples with 50 mL measurement line for easy dilutions.
Saber más
8 Place MARSXpress Vessel Expansion Set, 55 mL, PFA
Part # 907425The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Saber más
8 Place MARSXpress Vessel Expansion Set, 55 mL, PFA, 50 mL measurement line
Part # 907426The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples with 50 mL measurement line for easy dilutions.
Saber más
40 Place MARSXpress Vessel Starter Set, 55 mL, TFM
Part # 907398The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Saber más
24 Place MARSXpress Vessel Starter Set, 55 mL, TFM
Part # 907393The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Saber más
16 Place MARSXpress Vessel Starter Set, 55 mL, TFM
Part # 907373The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Saber más
8 Place MARSXpress Vessel Starter Set, 55 mL, TFM
Part # 907368The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Saber más
8 Place MARSXpress Vessel Expansion Set, 55 mL, TFM
Part # 907428The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Saber más
40 Place MARSXpress Vessel Starter Set, 20 mL, PFA
Part # 907563The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Saber más
24 Place MARSXpress Vessel Starter Set, 20 mL, PFA
Part # 907565The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Saber más
16 Place MARSXpress Vessel Starter Set, 20 mL, PFA
Part # 907567The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Saber más
8 Place MARSXpress Vessel Starter Set, 20 mL, PFA
Part # 907569The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Saber más
8 Place MARSXpress Vessel Expansion Set, 20 mL, PFA
Part # 907577The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Saber más
Gas Addition Spare Parts Kit
Part # 908260The Gas Addition spare parts kit includes the following:
- Pressure line assembly
- 1/8" PFA tubing
- Yellow ferrules
- 1/8" flangeless nut
- Tubing cutter
- Fitting removal tool
- Wrench
- 80 mL cleaning kit
- Fiber optic probe
Saber más
iPrep 12 Vessel Kit (Full)
Part # 911185The iPrep vessel is a high pressure, high sample weight, contactless monitored, high temperature vessel for use with MARS 6 with iWave. This vessel is well suited for digestion of difficult matrices such as waste oils, APIs with multiple aromatic rings, and geological samples. This vessel is also a great option when digesting 1 g or larger samples due to ppt detection limit needs.
Saber más
iPrep 12 Vessel Kit (Mini)
Part # 911190The iPrep vessel is a high pressure, high sample weight, contactless monitored, high temperature vessel for use with MARS 6 with iWave. This vessel is well suited for digestion of difficult matrices such as waste oils, APIs with multiple aromatic rings, and geological samples. This vessel is also a great option when digesting 1 g or larger samples due to ppt detection limit needs.
Saber más
iPrep Vessel Holder
Part # 404330iPrep Vessel Holder Holds up to a full set of iPrep vessel liners.
Saber más
iPrep Frame Rack
Part # 404420Holds up to 4 iPrep vessel assemblies for convenient and safe movement around the lab.
Saber más
iPrep 16 Vessel Kit (Full)
Part # 911130The iPrep vessel is a high pressure, high sample weight, contactless monitored, high temperature vessel for use with MARS 6 with iWave. This vessel is well suited for digestion of difficult matrices such as waste oils, APIs with multiple aromatic rings, and geological samples. This vessel is also a great option when digesting 1 g or larger samples due to ppt detection limit needs.
Saber más
iPrep 16 Vessel Kit (Mini)
Part # 911135The iPrep vessel is a high pressure, high sample weight, contactless monitored, high temperature vessel for use with MARS 6 with iWave. This vessel is well suited for digestion of difficult matrices such as waste oils, APIs with multiple aromatic rings, and geological samples. This vessel is also a great option when digesting 1 g or larger samples due to ppt detection limit needs.
Saber más
40 mL Clear Glass Collection Vials
Part # 153300Glass vials to collect the extract placed in the rack for the EDGE Extraction system. These glass collection vials are clear, 40 mL, pre-sterilized and capped.
Includes 72 vials.
Saber más
40 mL Graduated Glass Collection Vials
Part # 153450Glass vials to collect the extract placed in the rack for the EDGE Extraction system. These glass collection vials are graduated, 40 mL, pre-sterilized and capped.
Includes 72 vials.
Saber más
40 mL Amber Glass Collection Vials
Part # 153455Glass vials to collect the extract placed in the rack for the EDGE Extraction system. These glass collection vials are amber, 40 mL, pre-sterilized and capped.
Includes 72 vials.
Saber más
60 mL Clear Glass Collection Vials
Part # 153700Glass vials to collect the extract placed in the rack for the EDGE Extraction system. These glass vials collection are clear, 60 mL, pre-sterilized and capped.
Includes 72 vials.
Saber más
60 mL Amber Glass Collection Vials
Part # 153705Glass vials to collect the extract placed in the rack for the EDGE Extraction system. These glass vials collection are amber, 60 mL, pre-sterilized and capped.
Includes 72 vials.
Saber más
Razor Cleavage Vessels, 20 mL, pack of 60
Part # 170897Single-use, disposable, 20 mL cleavage syringes for use with the Razor Parallel Cleavage System (pack of 60)
Saber más
500 mL Safety Coated Glass Bottle
Part # 551325Pressure rated bottle typically used for Deprotection
Saber más
1 L Safety Coated Glass Bottle
Part # 551330Pressure rated bottle typically used for Main Wash
Saber más
250 mL Safety Coated Glass Bottle
Part # 551320Pressure rated bottle typicaly used for Activator and Activator Base
Saber más
Razor Cleavage Vessels, 35 mL, pack of 60
Part # 169900Single-use, disposable, 35 mL cleavage syringes for use with the Razor Parallel Cleavage System (pack of 60).
Saber más
Workstation Kit
Part # 528340Transform your Phoenix BLACK into a workstation for automatic calculation, storage and transfer of results. This will assist you in complying with CFR 11 Part 21, ISO and other QC requirements. For use in countries with 208-240V and 50/60HZ power supply.
Saber más
Amino Acid Dip Tube
Part # 216326The amino acid dip tube allows the system to draw up amino acid solution.
Saber más
ORACLE Check Standards Kit
Part # 523010Includes four sealed standards of varying oil content and instructions for setup and use.
Saber más
Pump Head maintenance kit
Part # 2307700,00 US$Kit for pump head maintenance: set of gaskets, 2 piston rods, 2 sapphire backing rings, 2 O-rings. Part of annual preventative maintenance.
Saber más
BPR cartridge, 40 psi
Part # 2307050,00 US$Replacement Cartridge (40 psi) for back-pressure regulator holder/assembly. Constructed with PEEK, Tefzel (EFTE), PCTFE, and gold plated stainless steel spring.
Saber más
16 gauge needle (Stainless steel) for manual injection valve
Part # 230715Luer-lock, stainless steel, 16 GA needle for manual injector
Saber más
UV Flow Cell (3 mm path length)
Part # 230795Flow cell for semi-prep to prep applications (low to medium sample loading). Stainless steel construction, 2 uL volume, 300 bar pressure limit
Saber más
BPR Assembly, 40 psi
Part # 230505Back-pressure regulator assembly, including holder, replaceable cartridge, fittings and ferrules. Installed after the detector to prevent bubble formation in the flow cell.
Saber más
40 Place MARSXpress Vessel Starter Set, 75 mL, TFM
Part # 907399The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Saber más
24 Place MARSXpress Vessel Starter Set, 75 mL, TFM
Part # 907389The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Saber más
16 Place MARSXpress Vessel Starter Set, 75 mL, TFM
Part # 907379The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Saber más





























































































































































































































