'5 g 29' の検索結果

5 mL sample loop, 1/16" OD (0.04" ID) stainless steel
Part # 229475Small sample loop ideal for low volume (< 5 mL) injections. Provides best resolution for small scale separations in both ambient and elevated temperature conditions. Can be used as a sample loop/pre-heating coil for 4-8 mL/min purifications using the column oven and 10 mm ID columns.
もっと詳しく
Delay Coil for 15-45 mL/min (2.3 m length, 1 mm ID)
Part # 229495PTFE Coil to provide a delay time between the detector flow cell and collector valve. Optimized for flow rates of 15-45 mL/min (typical of 20 - 30 mm ID columns).
もっと詳しく
Glass Extension, 11.5 in (29.2 cm)
Part # 13503011.5 in (29.2 cm) glass extender for open vessel work in the MARS 6 Synthesis.
もっと詳しく
ESP Plus Pressure Sensor Option
Part # 512290-CPressure sensor option for CEM Plus series vessels.
もっと詳しく
Q-Disc C1
Part # 152991Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C1 discs are thin 2.5 µm cellulose filters recommended for extraction applications of dry samples. These discs are suitable for GC or Gravimetric analysis.
Includes 500 C1 Q-Discs.
もっと詳しく
1/8" to 1/16" reducer
Part # 229285Reducer fitting to enable 1/16" OD capillary connections to 1/8" female fitting on stator of manual valve
もっと詳しく
Delay Coil for 4-8 mL/min (2 m length, 0.5 mm ID)
Part # 229490PTFE Coil to provide a delay time between the detector flow cell and collector valve. Optimized for flow rates of 4-8 mL/min (typical of 10 mm ID columns).
もっと詳しく
EasyPrep Plus Pressure & Temperature Control Vessel Assembly
Part # 514015Pressure & Temperature Control Vessel Assembly
もっと詳しく
EasyPrep Plus Temperature Only Control Vessel Assembly
Part # 404115Fiber Optic Temperature Control Vessel Assembly
もっと詳しく











