'liberty blue 2' の検索結果

The Liberty Blue™ HT12 System Upgrade converts a Discover to an automated microwave peptide synthesizer designed for Fmoc solid phase peptide synthesis.
もっと詳しく

The Liberty Blue™ HT24 System Upgrade converts a Discover to an automated microwave peptide synthesizer designed for Fmoc solid phase peptide synthesis.
もっと詳しく

The HT12 to Liberty Blue Tubing Bundle is used to connect the HT12 module to the Liberty Blue.
もっと詳しく

The Discover Spill Tray for Liberty Blue HT12/HT24 is designed to prevent any reagent spills or drips that occur when loading reagents on the system from damaging the Discover microwave reactor.
もっと詳しく

The Discover Spill Tray for Liberty Blue is designed to prevent any reagent spills from damaging the Discover microwave reactor.
もっと詳しく

The Splash Guard for Liberty Blue is a smooth sheet of HDPE designed to protect the front of the Liberty Blue.
もっと詳しく

The 3/16" Blue Ferrule is used to secure 3/16" OD tubing on the Liberty Blue.
もっと詳しく

The Blue Fritted Ferrule is used internally on the Liberty Blue to reduce nitrogen flow for bubbling.
もっと詳しく

Larger reservoirs for all reagents used in peptide synthesis
もっと詳しく

The Reaction Vessel Attenuator Assembly consists of the Liberty Blue attenuator assembly, tubing, and 30 mL reaction vessel.
もっと詳しく

The 120 mL Amino Acid Bottle is a larger reservoir for use on the Amino Acids on the Liberty Blue and Resin positions on the 12 and 24 position High Throughput modules.
もっと詳しく

These bottles are a larger reservoirs option for amino acid positions of the Liberty Lite (2.0), Liberty Blue (2.0), and Liberty Prime (2.0), and for HT resin positions.
もっと詳しく

The HT12/HT24 Data Cable is used to connect the HT12 or HT24 module to the Liberty Blue to allow communications.
もっと詳しく

Pressure rated bottle typicaly used for Activator and Activator Base
もっと詳しく

The HT12 option for the Liberty Blue and Liberty Prime provides automation for up to 12 peptide reactions. New reactions can be added and programmed at any time, even while another sample is running.
もっと詳しく

The fiber-optic probe clip slides over the fiber-optic probe and the thermowell of the reaction vessel attenuator assembly to secure the probe.
もっと詳しく

The Standard Level Sensor Cap Assembly is the insert with five ports used to connect the Waste Bottle to the Liberty Blue.
もっと詳しく

The Bottle Tubing Bundle for Pass-Through Bottle Caps consists of two tubes use to connect pressure rated bottles to Deprotection and Main Wash positions
もっと詳しく

This regulator is used to set the main pressure for the Liberty Blue.
もっと詳しく

The HT Discover Base Plate Extension allows the Discover to sit further out from the Liberty Blue.
もっと詳しく

The Fiber Optic Temperature Probe is 3 ft (91 cm) fiber optic temperature probe with connector for fiber optic temperature measurement and control option.
もっと詳しく

The 6 L Waste Option for Liberty Blue allows for the use of a larger waste container, increasing the scale and number of peptides that can be run before the waste container needs to be emptied.
もっと詳しく

Pressure rated bottle typically used for Deprotection
もっと詳しく

もっと詳しく

20L Waste Carboy
もっと詳しく

The Reaction Vessel Attenuator Assembly with Resin Loader for HT12/HT24 consists of the Liberty Blue attenuator with a resin tube, communications/power cable for the resin tube motor, tubing, and 30 mL reaction vessel.
もっと詳しく

20 disposable frits
もっと詳しく

Large bottle adapters for ACT and ACTB positions
もっと詳しく

Standard tubing used in Liberty Blue
もっと詳しく

This filter is used on the main solvent line, deprotection line, and HT transfer solvent line (if applicable) on the Liberty Lite, Liberty Blue, Liberty Lite 2.0, and Liberty Blue 2.0. (Not compatible with the Liberty Prime or Liberty Prime 2.0.)
もっと詳しく

The 2-Way Liquid valve is used on the Liberty Blue to control the flow of liquid and gas through the system.
もっと詳しく

The Three Bottle Holder designed to hold the waste bottle (1 L), main solvent bottle (500 mL), and deprotection bottle (250 mL).
もっと詳しく

Pressure rated bottle typically used for Main Wash
もっと詳しく