Valves, Sensors, and Regulators

The Frit Disk Assembly is used for reaction vessel bubbling and backpurging of the amino acid positions. Failure of this part will cause a PMain leak check error.

The 2-Way Liquid valve is used on the Liberty Blue to control the flow of liquid and gas through the system.

This o-ring is required for the 2-Way and 3-Way Liquid Valves (PN 167850 and 167855).

These screws are used to mount the 2-Way and 3-Way Liquid Valves (PNs 167850 and 167855) to the manifolds. 2.5mm

These screws are used to mount the 3-Way LiquidX Style valves (PN 167980) to the manifolds.

The HT12/HT24 Data Cable is used to connect the HT12 or HT24 module to the Liberty Blue to allow communications.

Liquid Sensor used to detect spills

Liquid Sensor for 3/16" OD Tubing

Liquid Sensor for 1/8" OD Tubing