Search results for: '5 l stainless steel '

Typically used for Main Wash

Eluent Filter, and fittings.

Small sample loop ideal for low volume (< 5 mL) injections.

Small sample loop ideal for low volume (< 5 mL) injections. Provides best resolution for small scale separations in both ambient and elevated temperature conditions. Can be used as a sample loop/pre-heating coil for 4-8 mL/min purifications using the column oven and 10 mm ID columns.

Typically used for Deprotection

Typically used for Main Wash

Typically used for Main Wash

Tongs for inserting and removing crucibles from the Phoenix Black muffle furnace.

Moderate sample loop ideal for standard (5-10 mL) injections.

Large sample loop ideal for high volume (10-20 mL) injections. Provides maximum loading of 30 mm columns in ambient temperature conditions.

Large sample loop ideal for high volume (10-20 mL) injections. Provides maxium loading of 30 mm columns.

Luer-lock, stainless steel, 16 GA needle for manual injector

Moderate sample loop ideal for standard (5-10 mL) injections.

Pressure rated bottle typically used for Main Wash

Pressure rated bottle typically used for Deprotection

Pressure rated bottle typicaly used for Activator and Activator Base

Flow cell for prep applications (high sample loading). Stainless steel construction, 3 uL volume, 200 bar pressure limit

In-line filter cartridge installed in pump purge valve inlet fitting. Filters eluents between the pump heads and the purge valve (before the mixer). Stainless steel frit, 2 µm pore size, 20 µL volume. Replacement interval is every 5,000 working hours.

Pack of 20 stainless steel nuts (bushings) for general system use

Flow cell for semi-prep to prep applications (low to medium sample loading). Stainless steel construction, 2 uL volume, 300 bar pressure limit

Pre-installed stainless steel capillary kit for pump module, 0.45 mm ID, black color code (2x of PN G1547B, 1x of G1547A)

Q-Screens are inserted on top of the sample within the Q-Cup Sample Holder for the EDGE Extraction System. A tool is used to insert the reusable stainless steel screens to keep the sample firmly packed within the Q-Cup Sample Holder.

Includes

• 12 Q-Screens
• Q-Screen Tool

The Q-Support is a reusable stainless steel mesh disc that is inserted on top of a Q-Disc to provide extra support. When using Q-Support a G0 Q-Disc should be used.

Replacement Cartridge (40 psi) for back-pressure regulator holder/assembly. Constructed with PEEK, Tefzel (EFTE), PCTFE, and gold plated stainless steel spring.

Pack of 25 stainless steel ferrules for general system use

Q-Screens are inserted on top of the sample within the Q-Cup Sample Holder for the EDGE Extraction System. A tool is used to insert the reusable stainless steel screens to keep the sample firmly packed within the Q-Cup Sample Holder.

Includes

• 1 Q-Screen

Larger reservoirs for all reagents used in peptide synthesis