Suchergebnisse für "- to b"

Adapter Ball Connector (connects Discover SP-D 80 to Explorer automation module)
Mehr erfahren

Torque Wrench (calibrated to 5 ft-lbs)
Mehr erfahren

For use with all EasyPrep Vessels.
Mehr erfahren

The ACT/ACT-B dip tube allows the system to draw up liquid from the ACT or ACT-B bottles.
Mehr erfahren

Fmoc-Lys(palmitoyl-Glu-OtBu)-OH
Mehr erfahren

Fmoc-Lys(palmitoyl-Glu-OtBu)-OH
Mehr erfahren

The Syringe to 1/8" Fitting Adapter is used to connect a luer-tip syringe to the standard 1/8" OD tubing.
Mehr erfahren

The Bottle Tubing Bundle for Pass-Through Bottle Caps consists of two tubes use to connect pressure rated bottles to Deprotection and Main Wash positions
Mehr erfahren

Fmoc-Trp(Boc)-OH
Mehr erfahren

Fmoc-Trp(Boc)-OH
Mehr erfahren

Fmoc-Trp(Boc)-OH
Mehr erfahren

Turntable designed to hold 40 standard 50 mL centrifuge tubes with cap. The HT-50 is designed for the extraction of PFAS from solid samples using IR temperature control.
Mehr erfahren

50-place, 120V heater block used to optimize sample temperature prior to total fat analysis when utilizing the robotic option.
Mehr erfahren

50-place, 240V heater block used to optimize sample temperature prior to total fat analysis when utilizing the robotic option.
Mehr erfahren

The Resin Distributor kit includes an adaptor block that holds the 96-well synthesis plate, three loading plate options, and a transfer plate that houses the loading plate.
Mehr erfahren

The Activator/Activator Base Bottle O-ring is an EPDM o-ring used to seal the activator and activator base bottles to the reagent manifold.
Mehr erfahren

30 filters for amino acid, activator and activator base dip tubes.
Mehr erfahren

300 filters for amino acid, activator and activator base dip tubes.
Mehr erfahren

Pressure regulator kit for Discover instruments
Mehr erfahren

The 4 mL Disposable Reaction Vessel is used to perform microcleavages.
Mehr erfahren

The Luer Plug is used to cap the reaction vessels during cleavage.
Mehr erfahren

155 mm glass connector adapter with 24/40 joint
Mehr erfahren

Undergraduate lab manual for teaching microwave assisted organic synthesis.
Mehr erfahren

The Bottle Dip Tube Filter is used in the main solvent and deprotection bottles of the Discover Bio wash station.
Mehr erfahren

Exhaust Blower for Discover SP-D without automation only
Mehr erfahren

Discover SP-D Fume Cabinet for 24/48 place autosampler. Fume Cabinet designed to be used with the Discover SP-D with Explorer 24/48. Includes retrofit kit PN 730099.
Mehr erfahren

Discover SP-D Fume Cabinet for 36/72 place autosampler. Fume Cabinet designed to be used with the Discover SP-D with Explorer 36/72. Includes retrofit kit PN 730099.
Mehr erfahren

Discover SP-D Fume Cabinet for 48/96 place autosampler. Fume Cabinet designed to be used with the Discover SP-D with Explorer 48/96. Includes retrofit kit PN 730099.
Mehr erfahren

10 mL fiber optic attenuator for the Discover S-Class system.
Mehr erfahren

Replacement level indicator to be used with the 2-piece reaction vessel calibration stand.
Mehr erfahren

The Benchtop Air Ionizer helps removes static to aid in speed and accuracy when working with powdered samples or in low humidity environments.
Mehr erfahren

Fmoc AA Kit (20 bottle kit)
Mehr erfahren

Low Inventory
Rink Amide ProTide Resin
Mehr erfahren

Low Inventory
Rink Amide ProTide Resin
Mehr erfahren

Low Inventory
Rink Amide ProTide Resin
Mehr erfahren

Low Inventory
Rink Amide ProTide Resin
Mehr erfahren

Replacement label for MARSXpress turntables top label.
Mehr erfahren

Q-Matrix Hydra, a polymer super absorbent, is used within the Q-Cup Sample Holder to aid in the removal of water from the sample for the EDGE Extraction System.

Includes 500 g of Q-Matrix Hydra.


Mehr erfahren

The Q-Support is a reusable stainless steel mesh disc that is inserted on top of a Q-Disc to provide extra support. When using Q-Support a G0 Q-Disc should be used.
Mehr erfahren

Autosampler for sequential chemical synthesis, requires Discover 2.0 microwave reactor (sold separately). Run up to 12 reactions per queue, a mixture of 10-mL and 35-mL vessels.
Mehr erfahren

Autosampler for sequential chemical synthesis, requires Discover 2.0 microwave reactor (sold separately). Run up to 48 reactions per queue, a mixture of 10-mL and 35-mL vessels.
Mehr erfahren

Calibrate and verify the accuracy of your digestion temperature with a compact, simple to use NIST traceable calibration device.
Mehr erfahren

PFAS Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE PFAS Extraction System. These discs are tested to not contain PFAS and recommended for all sample types.

Includes 125 PFAs Q-Discs.
Mehr erfahren

Calibrate and verify the accuracy of your MARS temperature with a compact, simple to use NIST traceable calibration device.
Mehr erfahren

Analyze large batches unattended on the ORACLE.
Mehr erfahren

For ease in capping and uncapping MARSXpress Vessels.
Mehr erfahren

The Thermowell with Resin Disruptor is a sapphire sheath used to protect the fiber-optic temperature probe.
Mehr erfahren

The fiber-optic probe clip slides over the fiber-optic probe and the thermowell of the reaction vessel attenuator assembly to secure the probe.
Mehr erfahren

The GL45 3-Way Pass-through Bottle Cap is used to connect the HT-12 transfer solvent bottle to the HT-12 module.
Mehr erfahren

80 mL pressure attenuator compatible with Discover SP and Discover S-Class
Mehr erfahren

This regulator assembly is used to set the low pressure for systems with the HT-12 or HT-24 options installed.
Mehr erfahren

Add-on option for the 80 mL Gas Addition Kit.
Mehr erfahren

10 mL fiber optic option for sealed vessels, Discover SP and Discover S-Class systems only.
Mehr erfahren

Pressure sensor option for CEM Plus series vessels.
Mehr erfahren

1/4" ID inlet/outlet port for open vessel scale up
Mehr erfahren

Consists of 1x 35 mL attenuator with hole for probe, 1x 10 mL attenuator with hole for probe, 1 open vessel attenuator, 1x 35 mL vessel with integrated thermowell , 1x 10 mL vessel with integrated thermowell, fiber optic option.
Mehr erfahren

For use with Discover Legacy systems.
Mehr erfahren

TFM liner to be used in SPD-80 Quartz vessels. 6 Pack
Mehr erfahren

TFM liner to be used in SPD-80 Quartz vessels. 12 Pack
Mehr erfahren

Our best-selling crucible. Holds up to 5g of sample. When used in the Phoenix BLACK microwave muffle furnace, up to 24 samples can be ashed at the same time. Quantity: 100
Mehr erfahren

Crucible caps are ideal for lightweight samples that are prone to blowing out of a crucible during handling. Quantity: 75
Mehr erfahren

Crucible caps are ideal for lightweight samples that are prone to blowing out of a crucible during handling. Quantity: 48
Mehr erfahren

Stainless steel rack designed to hold self-sealing crucibles during ash analysis.
Mehr erfahren

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

Fiber optic temperature control with saphire thermowell, EPS pressure, and standard Teflon coated ring.
Mehr erfahren

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

Fiber optic temperature control with saphire thermowell, EPS pressure, and standard Teflon coated ring.
Mehr erfahren

This all-in-one-tool contains an iPrep Torque tool assembly featuring 21 inch lbs. of torque for simple one-click assembly and has an attachable removal tool for ease of use during disassembly.
Mehr erfahren

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

Fiber optic temperature only control with saphire thermowell and standard Teflon coated ring.
Mehr erfahren

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

Fiber optic temperature only control with saphire thermowell and standard Teflon coated ring.
Mehr erfahren

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

Fiber optic temperature control with saphire thermowell, EPS pressure, and premium ring.
Mehr erfahren

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

Fiber optic temperature control with saphire thermowell, EPS pressure, and premium ring.
Mehr erfahren

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

Fiber optic temperature only control with saphire thermowell and Premium ring.
Mehr erfahren

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

Fiber optic temperature only control with saphire thermowell and Premium ring.
Mehr erfahren

The ashing cover fits into the crucible and reduces the risk of cross contamination or ash loss. Quantity: 200
Mehr erfahren

The ashing cover fits into the crucible and reduces the risk of cross contamination or ash loss. Quantity: 200
Mehr erfahren

The ashing cover fits into the crucible and reduces the risk of cross contamination or ash loss. Quantity: 100
Mehr erfahren

Includes everything needed for MARSXpress Plus Glass Vessel set. For iWave only temperature control.
Mehr erfahren

Includes everything needed to upgrade a 24-Place MARSXpress Plus, 110 mL, TFM vessel set into a Disposable Glass Vessel set.
Mehr erfahren

The type K Dual-Element High Temperature Thermocouple contains two thermocouples in one sheath. While one thermocouple controls the operating temperature, the second thermocouple can be connected to a digital thermometer to verify the accuracy of the controlling thermocouple. It is NIST-traceable with a certificate of calibration.
Mehr erfahren

The type K Dual-Element High Capacity Thermocouple contains two thermocouples in one sheath. While one thermocouple controls the operating temperature, the second thermocouple can be connected to a digital thermometer to verify the accuracy of the controlling thermocouple. It is NIST-traceable with a certificate of calibration.
Mehr erfahren

Assembly stand for the 100 mL reaction vessel. Includes tool for easy adapter removal
Mehr erfahren

A polymer super absorbent; tested to not contain PFAS, is used within the sample holder to aid in the dispersive removal of water and impurities during the solvent extraction of PFAS from solid or semi-solid samples.
Mehr erfahren

12-place, 120V heater block with insulated cover. Used to maintain the appropriate temperature for the normalization kit.
Mehr erfahren

12-place, 240V heater block with insulated cover. Used to maintain the appropriate temperature for the normalization kit.
Mehr erfahren

50-place, 120V heater block used to optimize sample temperature prior to total fat analysis.

*Not compatible with the ORACLE + Robot option.
Mehr erfahren

50-place, 240V heater block used to optimize sample temperature prior to total fat analysis.

*Not compatible with the ORACLE + Robot option.
Mehr erfahren

The Liberty Blue™ HT12 System Upgrade converts a Discover to an automated microwave peptide synthesizer designed for Fmoc solid phase peptide synthesis.
Mehr erfahren

The Liberty Blue™ HT24 System Upgrade converts a Discover to an automated microwave peptide synthesizer designed for Fmoc solid phase peptide synthesis.
Mehr erfahren

RV top oring
Mehr erfahren

The 120 mL Amino Acid Bottle is a larger reservoir for use on the Amino Acids on the Liberty Blue and Resin positions on the 12 and 24 position High Throughput modules.
Mehr erfahren

The Amino Acid Manifold O-ring is an EPDM o-ring used to seal the amino acid bottles to the manifold.
Mehr erfahren

Straight fitting used to connect 1/4" tubing to a cooling gas source.
Mehr erfahren

80 mL flow cell attenuator and vessel top
Mehr erfahren

80 mL reaction vessel assembly, does not include a fiber optic thermowell.
Mehr erfahren

Accessory kit for short style vessels
Mehr erfahren

The 2-Way Liquid valve is used on the Liberty Blue to control the flow of liquid and gas through the system.
Mehr erfahren

These screws are used to mount the 2-Way and 3-Way Liquid Valves (PNs 167850 and 167855) to the manifolds. 2.5mm
Mehr erfahren

These screws are used to mount the 3-Way LiquidX Style valves (PN 167980) to the manifolds.
Mehr erfahren

The HT Transfer Solvent Bottle Tubing Bundle is used to connect the transfer solvent bottle to the HT-12 module.
Mehr erfahren

Discover accessory for hydrogenation, carbonylation, or formylation reactions.
Mehr erfahren

Discover accessory for hydrogenation, carbonylation, or formylation reactions.
Mehr erfahren

Open vessel attenuator for Discover SP and Discover S-Class system.
Mehr erfahren

Discover software controller option
Mehr erfahren

Vessel holder with magnet to hold stir bar when pouring
Mehr erfahren

Add-on option for the 80 mL Gas Addition Kit for Discover Legacy systems.
Mehr erfahren

Includes liners, caps, plugs, composite sleeves, turntable, and one vessel rack (not shown). Accepts fiber optic temperature control.
Mehr erfahren

Includes liners, caps, plugs, composite sleeves, turntable, and one vessel rack (not shown). Accepts fiber optic temperature control.
Mehr erfahren

TFM spill cup supplied with the Discover SPD 80 reactor. The spill cup inserts directly into cavity to protect the cavity and infrared sensor from damage due to spillage or ruptured reaction vials. Note: Cup Includes side feature for temperature. Compatible with Discover SP-D 80 Plus only
Mehr erfahren

Removable spill tank used to capture and contain reaction components and vial fragments should a reaction vial fail in the cavity of the system. These trays fit into the spill channel of the system and are installed with a thumbscrew.
Mehr erfahren

10 mL flow cell attenuator for the Discover S-Class and Discover SP. Not compatible with the Discover Legacy.
Mehr erfahren

iPrep Torque tool featuring 21 inch lbs. of torque.
Mehr erfahren

Pronged removal tool for iPrep vessels for ease of use during disassembly.
Mehr erfahren

Q-Cups are coated aluminum sample holders for the EDGE Extraction System. Q-Cups consist of a cylinder piece which holds the sample, and a threaded bottom piece which holds the Q-Disc filter. This kit includes 12 Q-Cups, which is the maximum number of samples that can be extracted in a run. For efficiency, it's recommended to have two sets (24 Q-Cups) and two Glass Vial Racks. This would allow one set to be ran in an EDGE, while another set is being prepared.

Includes

• 12 Q-Cup Cylinders
• 12 Q-Cup Threaded Bottoms

Mehr erfahren

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C1 discs are thin 2.5 µm cellulose filters recommended for extraction applications of dry samples. These discs are suitable for GC or Gravimetric analysis.

Includes 500 C1 Q-Discs.


Mehr erfahren

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C4 discs are thin 11 µm cellulose filters recommended for extraction applications of dry or wet samples. These discs are suitable for GC or Gravimetric analysis.

Includes 500 C4 Q-Discs.


Mehr erfahren

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The M1 discs are thin 0.25 µm membrane filters recommended for extraction applications of dry samples. These discs are suitable for LC, GC or Gravimetric analysis.

Includes 250 M1 Q-Discs


Mehr erfahren

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C3 discs are thin 7 µm cellulose filters recommended for extraction applications of dry samples. These discs are suitable for GC or Gravimetric analysis.

Includes 250 C3 Q-Discs.


Mehr erfahren

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C7 discs are thin 20 µm cellulose filters recommended for extraction applications of dry or wet samples. These discs are suitable for GC or Gravimetric analysis.

Includes 250 C7 Q-Discs.


Mehr erfahren

Glass vials to collect the extract placed in the rack for the EDGE Extraction system. These glass collection vials are amber, 40 mL, pre-sterilized and capped.

Includes 72 vials.


Mehr erfahren

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

iWave temperature control and standard Teflon coated ring.
Mehr erfahren

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

iWave temperature control and standard Teflon coated ring.
Mehr erfahren

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

iWave temperature control and premium ring.
Mehr erfahren

Rugged, frame style vessels which are perfect for preparing difficult to digest organic materials such as oils and polymers as well as inorganic matrices such as ceramics and inorganic oxides.

iWave temperature control and premium ring.
Mehr erfahren

Glass vials to collect the extract placed in the rack for the EDGE Extraction system. These glass vials collection are amber, 60 mL, pre-sterilized and capped.

Includes 72 vials.


Mehr erfahren

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The M2 discs are thin 0.25 µm membrane filters recommended for extraction applications of wet or dry samples. These discs are suitable for LC, GC or Gravimetric analysis. The C9 discs must be used underneath the M2 discs to provide structural support during extraction.

Includes

• 500 M2 Q-Discs
• 500 C9 Q-Discs

Mehr erfahren

Q-Screens are inserted on top of the sample within the Q-Cup Sample Holder for the EDGE Extraction System. A tool is used to insert the reusable stainless steel screens to keep the sample firmly packed within the Q-Cup Sample Holder.

Includes

• 12 Q-Screens
• Q-Screen Tool

Mehr erfahren

Q-Shields are applied to the top of the glass collection vials for the EDGE Extraction System. The disposable aluminum shields help to eliminate splashing and minimize evaporation of the extract. The collection vial cap can be used as a tool to firmly apply shields.

Includes 250 Q-Shields.


Mehr erfahren

Pressure rated bottle typically used for Deprotection
Mehr erfahren

Pressure rated bottle typically used for Main Wash
Mehr erfahren

Pressure rated bottle typicaly used for Activator and Activator Base
Mehr erfahren

This wrench is pre-calibrated to provide the proper torque to all 2-way valve adjustments and should always be used when replacing the 2-way valves. The wrench is located inside the back door of the Liberty.
Mehr erfahren

This kit provides all parts required to upgrade a system using the 1-piece reaction vessel to a 2-piece reaction vessel. Includes a calibration stand (P/N 551625), 30-mL 2-piece reaction vessel assembly (P/N 551605), and 20 pack of frits (P/N 551600).
Mehr erfahren

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The C2 discs are thin 5 µm cellulose filters recommended for extraction applications of dry or wet samples. These discs are suitable for LC, GC or Gravimetric analysis.

Includes

• 250 C2 Q-Discs

Mehr erfahren

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The G0 discs are thin 0.3 µm glass fiber filters recommended for extraction applications of dry or wet samples. These discs are suitable for LC, GC or Gravimetric analysis. When using G0 a Q-Support must also be used.

Includes 250 G0 Q-Discs.
Mehr erfahren

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The D2 discs are 1 µm polypropylene depth filters that can be used for PFAS extraction.

Includes

• 125 D2 Q-Discs

Mehr erfahren

Q-Discs are filters that are inserted into a Q-Cup Sample Holder for the EDGE Extraction System. The S1 discs are a stack of C9 + G1 + C9 Q-Disc recommended for all applications.

Includes

• 125 S1 Q-Discs

Mehr erfahren

The amino acid dip tube allows the system to draw up amino acid solution.
Mehr erfahren

This kit provides all parts required to upgrade a system using the 1-piece reaction vessel to a 2-piece reaction vessel. Includes a calibration stand (P/N 551625), 125-mL 2-piece reaction vessel assembly (P/N 551535), and 20 pack of frits (P/N 551770).
Mehr erfahren

20L Waste Carboy Option
Mehr erfahren

Replacement Cartridge (40 psi) for back-pressure regulator holder/assembly. Constructed with PEEK, Tefzel (EFTE), PCTFE, and gold plated stainless steel spring.
Mehr erfahren

PEEK, one-piece hex-head long, 10-32 fittings for connecting the collector manifold tubings to the collector valve
Mehr erfahren

Back-pressure regulator assembly, including holder, replaceable cartridge, fittings and ferrules. Installed after the detector to prevent bubble formation in the flow cell.
Mehr erfahren

PTFE Coil to provide a delay time between the detector flow cell and collector valve. Optimized for flow rates of 4-8 mL/min (typical of 10 mm ID columns).
Mehr erfahren

PTFE Coil to provide a delay time between the detector flow cell and collector valve. Optimized for flow rates of 15-45 mL/min (typical of 20 - 30 mm ID columns).
Mehr erfahren

Q-Screens are inserted on top of the sample within the Q-Cup Sample Holder for the EDGE Extraction System. A tool is used to insert the reusable stainless steel screens to keep the sample firmly packed within the Q-Cup Sample Holder.

Includes

• 1 Q-Screen

Mehr erfahren

35 mL pressure rated vessels, pack of 25. The 35 mL pressure vessels have a working volume of 2.0-25.0 mL and are rated up to 300 psi. (Not compatible with Discover Benchmate or Labmate.)
Mehr erfahren

Removable reaction vessel for sub-ambient temperature reactions.
Mehr erfahren

The 4 mL Reaction Vessel Holder is used with the disposable 4 mL reaction vessels to perform microcleavages.
Mehr erfahren

Vessel accessory kit for enzymatic digestion applications.
Mehr erfahren

Discover software package.
Mehr erfahren

Add-on option for the MARS 6
Mehr erfahren

Add-on temperature control option for MARSXpress vessels
Mehr erfahren

Open vessel support for glassware 250mL-5L.
Mehr erfahren

Scale-up synthesis and extraction vessel set
Mehr erfahren

Scale-up synthesis and extraction vessel set
Mehr erfahren

Adds pressure monitoring to an existing Discover 1 system. 10 mL vessel only.
Mehr erfahren

Discover accessory for hydrogenation, carbonylation, or formylation reactions.
Mehr erfahren

Discover accessory for hydrogenation, carbonylation, or formylation reactions.
Mehr erfahren

80 mL reaction vessel assembly, does not include a fiber optic thermowell.
Mehr erfahren

Removable reaction vessel for sub-ambient temperature reactions.
Mehr erfahren

This kit contains a box of (100) 10 mL vessels and a box of (100) PTFE-Silicon septa with snap-top caps.
Mehr erfahren

This kit contains a box of (100) PTFE-Silicon septa with snap-top caps. (Not compatible with Discover SP or 2.0.)
Mehr erfahren

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Mehr erfahren

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Mehr erfahren

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Mehr erfahren

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Mehr erfahren

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Mehr erfahren

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Mehr erfahren

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples with 50 mL measurement line for easy dilutions.
Mehr erfahren

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Mehr erfahren

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples with 50 mL measurement line for easy dilutions.
Mehr erfahren

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Mehr erfahren

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples with 50 mL measurement line for easy dilutions.
Mehr erfahren

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Mehr erfahren

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples with 50 mL measurement line for easy dilutions.
Mehr erfahren

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Mehr erfahren

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples with 50 mL measurement line for easy dilutions.
Mehr erfahren

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Mehr erfahren

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Mehr erfahren

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Mehr erfahren

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Mehr erfahren

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Mehr erfahren

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Mehr erfahren

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Mehr erfahren

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Mehr erfahren

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Mehr erfahren

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Mehr erfahren

The Gas Addition spare parts kit includes the following: 

• Pressure line assembly
• 1/8" PFA tubing
• Yellow ferrules
• 1/8" flangeless nut
• Tubing cutter
• Fitting removal tool
• Wrench
• 80 mL cleaning kit
• Fiber optic probe

 

 

 

 

 

Mehr erfahren

Mehr erfahren

Mehr erfahren

Holds up to 4 iPrep vessel assemblies for convenient and safe movement around the lab.
Mehr erfahren

Integrated Camera Upgrade
Mehr erfahren

Integrated Camera Upgrade
Mehr erfahren

Mehr erfahren

Mehr erfahren

Glass vials to collect the extract placed in the rack for the EDGE Extraction system. These glass collection vials are clear, 40 mL, pre-sterilized and capped.

Includes 72 vials.


Mehr erfahren

Includes: 25-4 mL Pyrex Vessels and 100 Caps
Mehr erfahren

Glass vials to collect the extract placed in the rack for the EDGE Extraction system. These glass collection vials are graduated, 40 mL, pre-sterilized and capped.

Includes 72 vials.


Mehr erfahren

Glass vials to collect the extract placed in the rack for the EDGE Extraction system. These glass vials collection are clear, 60 mL, pre-sterilized and capped.

Includes 72 vials.


Mehr erfahren

Single-use, disposable, 20 mL cleavage syringes for use with the Razor Parallel Cleavage System (pack of 60)
Mehr erfahren

Single-use, disposable, 35 mL cleavage syringes for use with the Razor Parallel Cleavage System (pack of 60).
Mehr erfahren

Transform your Phoenix BLACK into a workstation for automatic calculation, storage and transfer of results. This will assist you in complying with CFR 11 Part 21, ISO and other QC requirements. For use in countries with 208-240V and 50/60HZ power supply.
Mehr erfahren

Includes four sealed standards of varying oil content and instructions for setup and use.
Mehr erfahren

Kit for pump head maintenance: set of gaskets, 2 piston rods, 2 sapphire backing rings, 2 O-rings. Part of annual preventative maintenance.
Mehr erfahren

Flow cell for semi-prep to prep applications (low to medium sample loading). Stainless steel construction, 2 uL volume, 300 bar pressure limit
Mehr erfahren

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Mehr erfahren

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Mehr erfahren

The easiest to assemble vessel for digestion or extraction of plants, vitamins, foods, and many environmental samples.
Mehr erfahren