Set Descending Direction

34 Item(s)

  1. PTFE Coil to provide a delay time between the detector flow cell and collector valve. Optimized for flow rates of 15-45 mL/min (typical of 20 - 30 mm ID columns). Learn More
  2. Luer-lock, stainless steel, 16 GA needle for manual injector Learn More
  3. 20 mL glass syringe for manual injections (does not include needle) Learn More
  4. Valve stator
    SKU: 230720

    Replacement Stator (stainless steel) for manual injection valve Learn More
  5. Flow cell for prep applications (high sample loading). Stainless steel construction, 3 uL volume, 200 bar pressure limit Learn More
  6. Flow cell for semi-prep to prep applications (low to medium sample loading). Stainless steel construction, 2 uL volume, 300 bar pressure limit Learn More
  7. BPR Assembly, 40 psi
    SKU: 230505

    Back-pressure regulator assembly, including holder, replaceable cartridge, fittings and ferrules. Installed after the detector to prevent bubble formation in the flow cell. Learn More
  8. PTFE Coil to provide a delay time between the detector flow cell and collector valve. Optimized for flow rates of 4-8 mL/min (typical of 10 mm ID columns). Learn More
  9. Rack for 16 mm diameter glass test tubes (up to 180 mm length) Learn More
  10. 50 mL pump head
    SKU: 230800

    Spare 50 mL pump head Learn More
  11. Pre-installed stainless steel capillary kit for pump module, 0.45 mm ID, black color code (2x of PN G1547B, 1x of G1547A) Learn More
  12. Mixer
    SKU: 230810

    Stainless steel mixer, 200 µL volume Learn More
  13. Tubing that connects seal wash pump to seal wash bottle Learn More
  14. O-ring for sealing venting screw on purge valve Learn More
  15. PEEK venting screw for manual purge valve operation; venting screw assembly includes O-ring Learn More
  16. Pack of 10 fingertight PEEK fittings for 1/16" OD tubing connections; rated to 6000 psi Learn More
  17. Small sample loop ideal for low volume (< 5 mL) injections. Provides best resolution for small scale separations in both ambient and elevated temperature conditions. Can be used as a sample loop/pre-heating coil for 4-8 mL/min purifications using the column oven and 10 mm ID columns. Learn More
  18. Moderate sample loop ideal for standard (5-10 mL) injections. Learn More
  19. Moderate sample loop ideal for standard (5-10 mL) injections. Learn More
  20. Large sample loop ideal for high volume (10-20 mL) injections. Provides maximum loading of 30 mm columns in ambient temperature conditions. Learn More
  21. Large sample loop ideal for high volume (10-20 mL) injections. Provides maxium loading of 30 mm columns. Learn More
  22. Union to couple two 1/16" OD stainless steel capillaries Learn More
  23. 1/8" to 1/16" reducer
    SKU: 229285

    Reducer fitting to enable 1/16" OD capillary connections to 1/8" female fitting on stator of manual valve Learn More
  24. PEEK, one-piece hex-head long, 10-32 fittings for connecting the collector manifold tubings to the collector valve Learn More
  25. Small sample loop ideal for low volume (< 5 mL) injections. Learn More
  26. Pack of 25 stainless steel ferrules for general system use Learn More
  27. Pack of 20 stainless steel nuts (bushings) for general system use Learn More
  28. Single spare 1/8" OD stainless steel ferrule for 1/8" sample loops or 1/8" to 1/16" reducer fitting Learn More
  29. Luer fitting for flash column inlet Learn More
  30. Fitting to connect to flash column outlet Learn More
  31. Rack for 50 mL conical centrifuge tubes Learn More
  32. Rack for 25 mm diameter glass test tubes (up to 180 mm length) Learn More

Set Descending Direction

34 Item(s)