Search results for: 'bottle tubing'

The HT Transfer Solvent Bottle Tubing Bundle is used to connect the transfer solvent bottle to the HT-12 module.

The Bottle Tubing Bundle for Pass-Through Bottle Caps consists of two tubes use to connect pressure rated bottles to Deprotection and Main Wash positions

Fittings used to connect the vent line tubing and drain line tubing of the Waste Bottle Assembly to the EDGE Extraction System.

The Waste Bottle Assembly collects the waste for the 40 mL EDGE Extraction system. The 2 L bottle and cap equipped with a level sensor is connected to EDGE Extraction system by vent line tubing, drain line tubing and level sensor connector.

The Waste Bottle Assembly collects the waste for the 60 mL EDGE Extraction system. The 2 L bottle and cap equipped with a level sensor is connected to EDGE Extraction system by vent line tubing, drain line tubing and level sensor connector.

Tubing that connects seal wash pump to seal wash bottle

Larger reservoirs for all reagents used in peptide synthesis

The Bottle Dip Tube Filter is used in the main solvent and deprotection bottles of the Discover Bio wash station.

Pressure rated bottle typically used for Deprotection

Pressure rated bottle typically used for Main Wash

Pressure rated bottle typicaly used for Activator and Activator Base

The 120 mL Amino Acid Bottle is a larger reservoir for use on the Amino Acids on the Liberty Blue and Resin positions on the 12 and 24 position High Throughput modules.

Typically used for Deprotection

Typically used for Main Wash

Typically used for Main Wash

Typically used for Main Wash

Fmoc AA Kit (20 bottle kit)

The Standard Level Sensor Cap Assembly is the insert with five ports used to connect the Waste Bottle to the Liberty Blue.

The ACT/ACT-B dip tube allows the system to draw up liquid from the ACT or ACT-B bottles.